Need flashing logs from various romids + ecuflash version
Thread Starter
Joined: Feb 2007
Posts: 9,486
Likes: 67
From: Melbourne, Australia
Need flashing logs from various romids + ecuflash version
Hi Guys,
Can you copy/paste your flashing log (right hand window in ecuflash) here?
Just post up the ROMID and Ecuflash version so no-one duplicates.
I am just hunting down the RAM block used for each ROMID and making sure its not Ecuflash version specific
Cheers
D.
Can you copy/paste your flashing log (right hand window in ecuflash) here?
Just post up the ROMID and Ecuflash version so no-one duplicates.
I am just hunting down the RAM block used for each ROMID and making sure its not Ecuflash version specific
Cheers
D.
Attaching a log of a failed flash (low battery) from 1.41 on v5.10 going to v6 on 88590015. Not sure if this contains everything you need for this version/rom....
If not let me know and I can get another one.
If not let me know and I can get another one.
Trending Topics
Thread Starter
Joined: Feb 2007
Posts: 9,486
Likes: 67
From: Melbourne, Australia
cool
I am mostly interested in the following lines:
[09:18:33.998] sending kernel size (4420)
[09:18:34.008] sending kernel load address (0xFFFF7000)
and of course what ROMID +ecuflash version
I am mostly interested in the following lines:
[09:18:33.998] sending kernel size (4420)
[09:18:34.008] sending kernel load address (0xFFFF7000)
and of course what ROMID +ecuflash version
Heres another 88590615 w/ 1.41 from today that went as intended. I noticed it polls 2 different addresses the second time... (first one failed due to low battery)
[14:45:00.011] sending init sequence 1 (0001)
[14:45:01.052] got 0x05 response
[14:45:01.052] sending init sequence 2
[14:45:01.062] got 0x1B response
[14:45:01.062] sending init sequence 3
[14:45:01.443] entering bootloader
[14:45:01.453] sending kernel size (0)
[14:45:01.473] sending kernel load address (0xFFFF6000)
[14:45:01.483] uploading kernel
[14:45:01.483] verifying kernel checksum response
[14:45:01.493] kernel valid
[14:45:01.503] sending init sequence 2
[14:45:01.523] got 0x1C response
[14:45:01.523] sending init sequence 3
[14:45:01.904] entering bootloader
[14:45:01.934] kernel read area: addr: 03FFFA len: 0006
[14:45:01.994] kernel rsp page: 030000
[14:45:02.004] kernel read addr: 03FFFA len: 06
[14:45:02.004] kernel rsp end
[14:45:04.037] sending init sequence 1 (0001)
[14:45:05.068] got 0x05 response
[14:45:05.078] sending init sequence 2
[14:45:05.108] got 0x1B response
[14:45:05.118] sending init sequence 3
[14:45:05.499] entering bootloader
[14:45:05.529] sending kernel size (0)
[14:45:05.549] sending kernel load address (0xFFFF6000)
[14:45:05.579] uploading kernel
[14:45:05.579] verifying kernel checksum response
[14:45:05.579] kernel valid
[14:45:05.599] sending init sequence 2
[14:45:05.609] got 0x1C response
[14:45:05.609] sending init sequence 3
[14:45:05.979] entering bootloader
[14:45:06.010] sending kernel size (4420)
[14:45:06.040] sending kernel load address (0xFFFF7000)
[14:45:06.060] uploading kernel
[14:45:06.781] verifying kernel checksum response
[14:45:06.791] kernel valid
[14:45:07.021] kernel get version
[14:45:07.041] kernel version is : OpenECU Mitsubishi SH7055 DUAL Kernel V1.06
[14:45:01.052] got 0x05 response
[14:45:01.052] sending init sequence 2
[14:45:01.062] got 0x1B response
[14:45:01.062] sending init sequence 3
[14:45:01.443] entering bootloader
[14:45:01.453] sending kernel size (0)
[14:45:01.473] sending kernel load address (0xFFFF6000)
[14:45:01.483] uploading kernel
[14:45:01.483] verifying kernel checksum response
[14:45:01.493] kernel valid
[14:45:01.503] sending init sequence 2
[14:45:01.523] got 0x1C response
[14:45:01.523] sending init sequence 3
[14:45:01.904] entering bootloader
[14:45:01.934] kernel read area: addr: 03FFFA len: 0006
[14:45:01.994] kernel rsp page: 030000
[14:45:02.004] kernel read addr: 03FFFA len: 06
[14:45:02.004] kernel rsp end
[14:45:04.037] sending init sequence 1 (0001)
[14:45:05.068] got 0x05 response
[14:45:05.078] sending init sequence 2
[14:45:05.108] got 0x1B response
[14:45:05.118] sending init sequence 3
[14:45:05.499] entering bootloader
[14:45:05.529] sending kernel size (0)
[14:45:05.549] sending kernel load address (0xFFFF6000)
[14:45:05.579] uploading kernel
[14:45:05.579] verifying kernel checksum response
[14:45:05.579] kernel valid
[14:45:05.599] sending init sequence 2
[14:45:05.609] got 0x1C response
[14:45:05.609] sending init sequence 3
[14:45:05.979] entering bootloader
[14:45:06.010] sending kernel size (4420)
[14:45:06.040] sending kernel load address (0xFFFF7000)
[14:45:06.060] uploading kernel
[14:45:06.781] verifying kernel checksum response
[14:45:06.791] kernel valid
[14:45:07.021] kernel get version
[14:45:07.041] kernel version is : OpenECU Mitsubishi SH7055 DUAL Kernel V1.06
