Ecuflash error on a X
Ecuflash error on a X
I have been running a modified rom for a couple of months and last night i was bored so i thought i would flash my old rom back and do some logging so i could see the difference between the 2. That flashed back fine and drove fine but logging didnt work.
So this morning i couldnt be bothered spending hours trying to get the logging going so i went to flash back my modified rom and it comes up with a ecuflash error. I cant test write, compare or do anything to my old rom or new rom. I cant even read the rom that is in there now.
The error comes up like this:
[11:42:14.055] 52370024 (149 tables) inheriting evo10base (173 tables)
[11:42:14.055] 52360018 (7 tables) inheriting 52370024 (181 tables)
[11:42:14.086] 1048576 byte image read.
[11:42:56.247] J2534 API Version: 04.04
[11:42:56.247] J2534 DLL Version: 0.50.2464 Jan 29 2009 10:58:58
[11:42:56.247] Device Firmware Version: 1.05.2463
[11:42:57.827] -- loading kernel --
[11:42:57.827] -- connecting to kernel --
[11:42:57.827] kernel get version
[11:42:58.201] ECU HW part number : 1860A933
[11:42:58.233] ECU SW part number : 1860A93300
[11:42:58.248] VIN : CZ4A-0000556
[11:42:58.248] -- unlocking ECU --
[11:42:58.248] starting session...
[11:42:58.295] requesting seed...
[11:42:58.591] interface close
[11:42:58.607] interface close
the orig rom is a 52360016. I have been running a 52360018 for a couple of months with no trouble. Please help me because the standard ROM is boring
So this morning i couldnt be bothered spending hours trying to get the logging going so i went to flash back my modified rom and it comes up with a ecuflash error. I cant test write, compare or do anything to my old rom or new rom. I cant even read the rom that is in there now.
The error comes up like this:
[11:42:14.055] 52370024 (149 tables) inheriting evo10base (173 tables)
[11:42:14.055] 52360018 (7 tables) inheriting 52370024 (181 tables)
[11:42:14.086] 1048576 byte image read.
[11:42:56.247] J2534 API Version: 04.04
[11:42:56.247] J2534 DLL Version: 0.50.2464 Jan 29 2009 10:58:58
[11:42:56.247] Device Firmware Version: 1.05.2463
[11:42:57.827] -- loading kernel --
[11:42:57.827] -- connecting to kernel --
[11:42:57.827] kernel get version
[11:42:58.201] ECU HW part number : 1860A933
[11:42:58.233] ECU SW part number : 1860A93300
[11:42:58.248] VIN : CZ4A-0000556
[11:42:58.248] -- unlocking ECU --
[11:42:58.248] starting session...
[11:42:58.295] requesting seed...
[11:42:58.591] interface close
[11:42:58.607] interface close
the orig rom is a 52360016. I have been running a 52360018 for a couple of months with no trouble. Please help me because the standard ROM is boring
1. This is the evo 1-9 forum section. I would grant an exception except that.......
2. You also posted this in the evo X section.
One post in the proper place is enough and keeps from cluttering up space and/or it easier to find answers when searching for a thread in the future. Furthermore the people in this area of the forum are most educated about evo 1-9. More so, your reasoning for needing spoonfed is weak "standard ROM is boring".
2. You also posted this in the evo X section.
One post in the proper place is enough and keeps from cluttering up space and/or it easier to find answers when searching for a thread in the future. Furthermore the people in this area of the forum are most educated about evo 1-9. More so, your reasoning for needing spoonfed is weak "standard ROM is boring".
Thread
Thread Starter
Forum
Replies
Last Post
BlackHawk_Tsi
Evo X Engine Management / Tuning Forums
0
Apr 20, 2015 04:25 PM
myparkerbros
ECU Flash
1
Aug 24, 2013 09:13 PM
Grip Master
ECU Flash
3
Feb 2, 2013 06:21 PM
MonacoGP
09+ Ralliart Engine/Turbo/Drivetrain
5
Apr 8, 2011 02:06 PM



