TephraMod V7
#571
Evolving Member
iTrader: (14)
Join Date: Oct 2006
Location: Los Angeles, CA
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
^^^^LOLOLOL good one tephra. Newbs, can't live with them.... can't bust out the flame thrower without them (We've all been there)
Fired right up here too!
88590715
Tested so far:
-AFR and Timing on launch maps (though I was seeing 3* lower, I think it was from knock)
-Alt-map (bigmap) timing and fuel
-standard map timing and fuel (at idle)
-Narrowband sim patch (mrFred) appears to be working correctly (need to drive more first)
I'll update as I test more!
Fired right up here too!
88590715
Tested so far:
-AFR and Timing on launch maps (though I was seeing 3* lower, I think it was from knock)
-Alt-map (bigmap) timing and fuel
-standard map timing and fuel (at idle)
-Narrowband sim patch (mrFred) appears to be working correctly (need to drive more first)
I'll update as I test more!
#576
Evolving Member
Join Date: Sep 2009
Location: Creston, Iowa
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Ok heres what happened. Maybe this was already covered and Ive been living in another world. I was looking at my old map of tephra5.10. Since I just downloaded ecuflash 1.42 I had to go find my tephra5.10 folder and add in the correct xml. When that is added into the regular 88590015 map it screws up my 88590715 map. Such as not showing my alternate boost tables.
#584
Evolved Member
iTrader: (3)
I was using this for the thermo fan duty (88590015) and it worked fine using the test v.6 rom, but for some reason its not showing up for me w/ the new v.7... Am I missing somethin?
<table name="Thermo Fan Duty" category="Misc" address="4012" type="3D" level="2" swapxy="true" scaling="Percent (128)">
<table name="Conditions" type="Static X Axis" elements="9">
<data>On1</data>
<data>On2</data>
<data>On3</data>
<data>Off1</data>
<data>Off2</data>
<data>Off3</data>
<data>A/C1</data>
<data>A/C2</data>
<data>A/C3</data>
</table>
<table name="Engine Temp" address="7034" type="Y Axis" elements="12" scaling="Temp"/>
</table>
<table name="Thermo Fan Duty" category="Misc" address="4012" type="3D" level="2" swapxy="true" scaling="Percent (128)">
<table name="Conditions" type="Static X Axis" elements="9">
<data>On1</data>
<data>On2</data>
<data>On3</data>
<data>Off1</data>
<data>Off2</data>
<data>Off3</data>
<data>A/C1</data>
<data>A/C2</data>
<data>A/C3</data>
</table>
<table name="Engine Temp" address="7034" type="Y Axis" elements="12" scaling="Temp"/>
</table>
#585
Evolving Member
Join Date: Sep 2009
Location: Creston, Iowa
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts