i was using the EGR solenoid for ecu boost control with great success on a FP red with a forge WG.
now i changed my setup to a AMS 35r HTA with a tial external WG and i can't figure out how to connect the vacuum hoses to make this work.

anyone knows how to do this?

i installed the "out" of the solenoid to the bottom niple of the WG but it doesnt work at all. the WG has a 2nd niple on the top but i don't know how to use that one.

 

really?

 

Here, this came up as the first result on my search in google:
http://forums.nasioc.com/forums/show...7&postcount=11

and in the whopping 10 results returned by this sub-forum:
https://www.evolutionm.net/forums/ec...wastegate.html
https://www.evolutionm.net/forums/5789063-post311.html
https://www.evolutionm.net/forums/5789040-post310.html

Must be nice to have other people doing the work for you....

 

You would put whatever hose you had to the WGA on the red to the side port (If it is Tial style)

The hose that went to the compressor outlet (boost source) on the red you would put to a pressure (boost) source as close to the turbo as possible.

- Bryan

 

I know. Thought I helped him enough in the EGR solenoid thread