HOW-To 96260009 JDM8MR to 96530706
#61
hopefully doing this today
hitting a problem
the fuel map graph in the new v7 has this folded line across the high rpm line ! what is it?
the map numbers look the same !
why does the color scale not match either? .................................................. .................Can you see that Z shape below?
.
hitting a problem
the fuel map graph in the new v7 has this folded line across the high rpm line ! what is it?
the map numbers look the same !
why does the color scale not match either? .................................................. .................Can you see that Z shape below?
.
Last edited by leecavturbo; Apr 2, 2010 at 08:01 AM.
#62
which is the table in 0009 for maf compensation to port to v7 ?
.
if so does the maf load / hertz units matter ?
.
.
if so does the maf load / hertz units matter ?
.
Last edited by leecavturbo; Apr 2, 2010 at 09:13 AM.
#63
i dont quite get what ur asking. Z shape? folded line? which map numbers look the same, the one's below? they look like they're from different roms. colours for the two timing maps you posted may be different because on one the key ranges between -100 to 100 the other -50 to 50? dunno.
did you post a fuel map?
just copy your fuel and timing map settings over to v7 making sure you compensate for the difference in scale if any.
did you post a fuel map?
just copy your fuel and timing map settings over to v7 making sure you compensate for the difference in scale if any.
hopefully doing this today
hitting a problem
the fuel map graph in the new v7 has this folded line across the high rpm line ! what is it?
the map numbers look the same !
why does the color scale not match either? .................................................. .................Can you see that Z shape below?
.
hitting a problem
the fuel map graph in the new v7 has this folded line across the high rpm line ! what is it?
the map numbers look the same !
why does the color scale not match either? .................................................. .................Can you see that Z shape below?
.
#64
didn't post a fuel map
look at the top right graph there is a folded line just like a folded piece of paper ! the look look right but whats going on in the graph!
.
.
.
look at the top right graph there is a folded line just like a folded piece of paper ! the look look right but whats going on in the graph!
.
.
.
Last edited by leecavturbo; Apr 2, 2010 at 11:47 AM.
#65
just copy the below into v7 MAF COMPENSATION. MAF Hz vs Load doesnt matter, same thing scaled differently.
168.023
168.023
173.039
173.039
170.531
169.277
170.531
169.277
169.277
170.531
169.277
169.277
169.277
171.785
169.277
169.277
166.77
166.77
166.77
166.77
166.77
168.023
168.023
173.039
173.039
170.531
169.277
170.531
169.277
169.277
170.531
169.277
169.277
169.277
171.785
169.277
169.277
166.77
166.77
166.77
166.77
166.77
#67
still confused about the graph!
new pic/angle added post #64
#72
ok i have rescaled those load and rpm axis's and then saved but they revert back to this repeated items !
i.e 7000 rpm twice
even unticking then re ticking reverts them back to this problem
its only ignition maps alt and main that do this fuel alt/main is fine rescaled
anyone want to play?
http://www.keepandshare.com/doc/1836...6-pm-262k?da=y
i.e 7000 rpm twice
even unticking then re ticking reverts them back to this problem
its only ignition maps alt and main that do this fuel alt/main is fine rescaled
anyone want to play?
http://www.keepandshare.com/doc/1836...6-pm-262k?da=y
Last edited by leecavturbo; Apr 2, 2010 at 01:27 PM.
#73
working on it... the scale for MAF compensation if different does matter i edited my xml to use the correct scaling
EDIT: ur xml def is wrong. ur maps looked small in the picture u posted... and they are, here is what ur ALT ign and fuel look in my ecuflash. i have also shown the table def as it should be. compare and i will say 100% ur comp will have them wrong. checked ur maf and it is correct.
EDIT: ur xml def is wrong. ur maps looked small in the picture u posted... and they are, here is what ur ALT ign and fuel look in my ecuflash. i have also shown the table def as it should be. compare and i will say 100% ur comp will have them wrong. checked ur maf and it is correct.
Last edited by ziad; Apr 2, 2010 at 02:09 PM.
#74