Been seeing this in my logs recently, Wondering if anyone has seen something like this, or can explain it. You can see in the pics and the log that peak load hits before peak boost. At its highest point, 365% its only at 27 psi. The boost continues on until 35psi, where the load is only at 320ish. Shouldnt the highest load be at the highest boost? Or is it that my laptop is not capable of logging fast enough?

 

looks like alitle logger lag...are you sure your MAP sensor is scaled correctly?

 

all scaled correctly. other than the fact that the "map comparison" table is supposed to be changed to 1.23 and ecuflash will only accept 1.24, dont think that would do it.

I would think its just the laptop lagging, but it only does it on my car. Ive tested on friends cars.

 

its the way u view the logs, change the way ur viewing it in evoscan.

if thats not it then its pretty weird your logs are so smooth (relatively speaking).

 

thats normal.

think about where load is measured and where psi is measured.

 

Ding ding ding!