Going back to 94170015
#227
Evolved Member
iTrader: (7)
Join Date: May 2010
Location: Maine
Posts: 836
Likes: 0
Received 0 Likes
on
0 Posts
gotcha. now it matches the format of 9653 for some reason...wierd. thanks man. Still not working 100% for me (still stalling at clutch in), but now that Im trying my tuned maf scaling, it may be better.
#228
Evolved Member
Thread Starter
iTrader: (22)
Join Date: Nov 2003
Location: Northern KY near Cincy
Posts: 2,408
Likes: 0
Received 6 Likes
on
6 Posts
Your stock rom is the 96940011....it is very finicky to get running right. Some will like the 9417 while others will like 9653.
The key is to make EVERY table have the same exact values as your stock rom....THEN start tuning.
Leave the Periphery bits as they are with a stock 9417 or stock 9653....don't use your 9694 values in the peripheries as each rom operates slightly different.
The key is to make EVERY table have the same exact values as your stock rom....THEN start tuning.
Leave the Periphery bits as they are with a stock 9417 or stock 9653....don't use your 9694 values in the peripheries as each rom operates slightly different.
#230
Evolved Member
iTrader: (18)
A 03 should not have throttle hang. It can be your throttle cable is too tight and when you let off the acc pedal, the rocking motion of the engine back and forth, will make your rpm rise and hang as you lift off at redline. I went through this 2 yrs ago and it ended being the darn cable was too tight.
#231
Evolved Member
iTrader: (38)
Join Date: Feb 2005
Location: Laurel, MD
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Your stock rom is the 96940011....it is very finicky to get running right. Some will like the 9417 while others will like 9653.
The key is to make EVERY table have the same exact values as your stock rom....THEN start tuning.
Leave the Periphery bits as they are with a stock 9417 or stock 9653....don't use your 9694 values in the peripheries as each rom operates slightly different.
The key is to make EVERY table have the same exact values as your stock rom....THEN start tuning.
Leave the Periphery bits as they are with a stock 9417 or stock 9653....don't use your 9694 values in the peripheries as each rom operates slightly different.
Thread
Thread Starter
Forum
Replies
Last Post