94170715 V7 Issues
#241
Evolved Member
iTrader: (1)
Can someone confirm that uses ECU boost that their Boost error and WCDC Correction is working. Mine always registers -3.087 for Boost error and 0 for WGDC Correction.
I was logging today and the WGDC did not correct downward when it should have.
All my settings appear to be correct. Wow another problem...
I was logging today and the WGDC did not correct downward when it should have.
All my settings appear to be correct. Wow another problem...
Care to send me your ROM? robbie (dot[ nelson at gmail (dot) com
#242
Evolved Member
Thread Starter
iTrader: (19)
Join Date: Oct 2004
Location: CT
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
well the boost error has already been covered in this thread... either your not going into open loop or your rpm activation/deactivation is wrong...
sorry about 8425, all the maps are located at 0x3xxxx - so it wont tell you what map your on...
try 0x8426...
does logging gears work? i take it you applied the gear fix?
sorry about 8425, all the maps are located at 0x3xxxx - so it wont tell you what map your on...
try 0x8426...
does logging gears work? i take it you applied the gear fix?
I'll change the addy for the alt maps tomorrow and report back.
Gear is working beautifully.
Last edited by chmodlf; May 3, 2010 at 04:57 AM.
#243
Evolving Member
iTrader: (14)
Join Date: Feb 2006
Location: Westchester, NY
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
well the boost error has already been covered in this thread... either your not going into open loop or your rpm activation/deactivation is wrong...
sorry about 8425, all the maps are located at 0x3xxxx - so it wont tell you what map your on...
try 0x8426...
does logging gears work? i take it you applied the gear fix?
sorry about 8425, all the maps are located at 0x3xxxx - so it wont tell you what map your on...
try 0x8426...
does logging gears work? i take it you applied the gear fix?
I tried logging 0x8426 and I am getting 139 on alt maps and 151 on regular. The value only seems to change when the maps are changed. Does this seem right to you? The only reason I ask is because it used to be 0 and 3 and now its 139 and 151.
#247
Evolving Member
Join Date: May 2008
Location: Dallas, TX
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
does this also apply to the 88590015 roms? I have same issue. thanks!
#249
Evolved Member
iTrader: (2)
Join Date: Mar 2003
Location: Santa Cruz
Posts: 2,218
Likes: 0
Received 0 Likes
on
0 Posts
So I hate to bump this thread,
but...
I seem to have problems with the latest patch.
When I converted over to V7 I took my base map from my old tune and moved it over to all the available maps so I could get a base line on the V7 performance before attempting any alternate maps or launch maps. As a result I didn't see this problem right away.
I am bouncing between my main and alternate maps. With V5 I could use my ISC switch to switch between the base and alternate maps, but now the map bounces between different maps before stabalizing
I have attached a log file that demonstrates the problem. For now I am only using one map, basically copying over all my changes to the other maps so I continue evaluating V7.
but...
I seem to have problems with the latest patch.
When I converted over to V7 I took my base map from my old tune and moved it over to all the available maps so I could get a base line on the V7 performance before attempting any alternate maps or launch maps. As a result I didn't see this problem right away.
I am bouncing between my main and alternate maps. With V5 I could use my ISC switch to switch between the base and alternate maps, but now the map bounces between different maps before stabalizing
I have attached a log file that demonstrates the problem. For now I am only using one map, basically copying over all my changes to the other maps so I continue evaluating V7.
#251
Evolved Member
iTrader: (2)
Join Date: Mar 2003
Location: Santa Cruz
Posts: 2,218
Likes: 0
Received 0 Likes
on
0 Posts
requestID 00 according to Evoscan. I used what ever the values were set to with the latest V7 94170715 version with the latest gear patch. The patch was configured on a fresh install of EcuFlash to make sure I didn't create any conflicts.
#252
EvoM Guru
iTrader: (6)
well MUT00+MUT01 is setup for 2byte airflow from memory..
MUT00 is NOT setup for what map is currently active..
which is why your getting funny numbers
you can reconfigure a spare MUT to log 0x8426, and that should only cycle between 2 numbers (or 3 if you have launch maps setup)
MUT00 is NOT setup for what map is currently active..
which is why your getting funny numbers
you can reconfigure a spare MUT to log 0x8426, and that should only cycle between 2 numbers (or 3 if you have launch maps setup)
#254
Evolved Member
iTrader: (3)
Hello
what coud cause my problem seems like rev limiter @6000rpm ?! But in the limits section the stationary rev limiter and the rev limiter set to 7500rpm ?!
I have omni 4 bar map but If set my Boost desired engine PSI nothing is happend only if I using the Boost desired engine load
In the main map boost control setting the Boost adder ( load and psi ) will add the boost to alt map boost settings to ?
what coud cause my problem seems like rev limiter @6000rpm ?! But in the limits section the stationary rev limiter and the rev limiter set to 7500rpm ?!
I have omni 4 bar map but If set my Boost desired engine PSI nothing is happend only if I using the Boost desired engine load
In the main map boost control setting the Boost adder ( load and psi ) will add the boost to alt map boost settings to ?