Fic 2150 scaling helllllllllppppp!!!!
#61
Evolving Member
iTrader: (5)
Join Date: Jun 2010
Location: newyork
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
injector scaling
How do you get the injector scaling value to go pass 770 cc/min to 1624 for fic 2150,s? Am I missing something here?I have tephra mod 7.Thought my stock rom was to low.
#65
I had to input the code. My afrs was steady at 11.5 until i used 1.040 min ipw. But now i cant get it ti idle right. On cold start its 11.0 and wont idle at all until it warms up then its at 14.7-15.5.
(scaling at 1218)
4.69-3.000
7.03-1.488
9.38-0.912
11.72-0.672
14.06-0.552
16.41-0.408
18.68-0.264
fuel trims are at -8 low and -10 mid.
mods:
gt35r turbo
stock bottom end
non ported head
tomei 280 cams 11.5 lift
super tech dual valve springs
tial 50mm bov (vta)
stock intake and throttle body
On MAF
E85
egr delete
exedy twin disk clutch
Need advice. I have the delete plug installed as well. It runs rich and have to stay on the throttle to keep it at idle. It dies when i press the clutch in. I have tried idle settings and injector settings. Please help Aaron.
(scaling at 1218)
4.69-3.000
7.03-1.488
9.38-0.912
11.72-0.672
14.06-0.552
16.41-0.408
18.68-0.264
fuel trims are at -8 low and -10 mid.
mods:
gt35r turbo
stock bottom end
non ported head
tomei 280 cams 11.5 lift
super tech dual valve springs
tial 50mm bov (vta)
stock intake and throttle body
On MAF
E85
egr delete
exedy twin disk clutch
Need advice. I have the delete plug installed as well. It runs rich and have to stay on the throttle to keep it at idle. It dies when i press the clutch in. I have tried idle settings and injector settings. Please help Aaron.
Thread
Thread Starter
Forum
Replies
Last Post
Raceghost
Evo Engine / Turbo / Drivetrain
4
May 21, 2016 12:37 PM
NOMIEZVR4
ECU Flash
11
Feb 14, 2012 09:17 PM
negativegeforce
ECU Flash
25
Jun 20, 2010 02:24 PM