Well I've got the idle cells at 9* timing and 16.8* MIVEC and I'm not getting any lope really. Is there anything else I'm missing? Call me a ricer but I love the lope and I just want my question answered please.

Thanks guys...

 

2 ways to do it:-

1. install exos cam gear n retard it
2. force unequal idling timing. on cells u want the beast to start panting during a/c off go for lower timing

I did this for ricers on the budget. No cams.

 

Haha epic fail

 

whats your idle set at?

 

Idle is about 900 right now but I had a dipping problem that I just took care of so I may lower it a bit to like 750-800. Had it at 850 before and it only slightly loped.

 

okay try 13* timing for the idle load cells and bump up your idle to 1038. thats my current idle and i have 272's and have a great lope sound.

 

babs u ricer. should have gotten that cam gear.

 

Lean it out and take out some ignition timing. My BC272's don't lope at the stock 14.7:1 AFR, but they're great at 16:1.

 

I thought adding timing smooths it out...?

 

The lope gets old. Trust me.

 

Well I'll wait for that day but it can't get old if I'm not experiencing it. Stay on topic please...

Anybody else?

 

Evo IX's don't lope much bro

 

Get bigger cams.

http://www.youtube.com/watch?v=5uzMxKxVyJI

 

Orly?

Same exact cams I have, same Evo IX...

http://www.youtube.com/watch?v=FEI1rCMctRM

http://www.youtube.com/watch?v=7729iccev_8

M3s are pretty damn big haha...280/272 so I dunno how much bigger you want me to go. I believe the vid you posted is of either FP 4 or 5r's. If they're the 5r's, then they may be a bit bigger but Cosworth M3s should lope regardless. Check above vids...

 

I must have watched that video with the Greddy TI exhaust 100 times while I was in the process of my build. lol.