Notices
ECU Flash

96260009 IAT comp tables needed

Thread Tools
 
Search this Thread
 
Old Aug 4, 2010 | 07:24 PM
  #1  
philr8's Avatar
Thread Starter
Evolving Member
15 Year Member
iTrader: (4)
 
Joined: Feb 2009
Posts: 245
Likes: 2
From: NZ
96260009 IAT comp tables needed

Hi guys

Does any 1 have the ign trim vs air temp table defined? I dont have it in my xml and have a race meeting coming up this weekend, so would like it to pull timing as air temp increases

Also fuel vs air temp would be great to (mine shows in units not % of fuel increase/decrease)

Thanks
Phil
Reply
Old Aug 6, 2010 | 12:24 AM
  #2  
philr8's Avatar
Thread Starter
Evolving Member
15 Year Member
iTrader: (4)
 
Joined: Feb 2009
Posts: 245
Likes: 2
From: NZ
Bump

Any one?
Reply
Old Aug 7, 2010 | 03:18 AM
  #3  
ziad's Avatar
Evolved Member
iTrader: (1)
 
Joined: Apr 2007
Posts: 529
Likes: 1
From: Melbourne
phil i had a look and for ITAT i think the values are
Ignition Trim vs Air Temp=0x3e16
Air Temp=0x5d26

i dont have the fuel one defined in 9653 and hence cannot trace that back. hopefully this helps.
Reply
Old Aug 7, 2010 | 03:13 PM
  #4  
philr8's Avatar
Thread Starter
Evolving Member
15 Year Member
iTrader: (4)
 
Joined: Feb 2009
Posts: 245
Likes: 2
From: NZ
Originally Posted by ziad
phil i had a look and for ITAT i think the values are
Ignition Trim vs Air Temp=0x3e16
Air Temp=0x5d26

i dont have the fuel one defined in 9653 and hence cannot trace that back. hopefully this helps.
Thanks Ziad, are you able to give me the xml lines i need to insert. As I have no idea on how to create these

Thanks
Phil
Reply
Old Aug 7, 2010 | 08:20 PM
  #5  
GregM's Avatar
Evolving Member
iTrader: (1)
 
Joined: Aug 2009
Posts: 441
Likes: 4
From: New Zealand
Based off my xml, using the addresses Ziad gave, it should look like this:

<table name="Ignition Trim vs Air Temp" category="Timing" address="3e16" type="2D" level="2" scaling="Enrich">
<table name="Air Temp" address="5d26" type="X Axis" elements="7" scaling="Temp"/></table>

Let me know if it works.

Last edited by GregM; Aug 7, 2010 at 08:22 PM.
Reply
Old Aug 7, 2010 | 11:17 PM
  #6  
philr8's Avatar
Thread Starter
Evolving Member
15 Year Member
iTrader: (4)
 
Joined: Feb 2009
Posts: 245
Likes: 2
From: NZ
Thanks Greg

Looks good in my rom image
Reply
Old Aug 8, 2010 | 12:12 AM
  #7  
GregM's Avatar
Evolving Member
iTrader: (1)
 
Joined: Aug 2009
Posts: 441
Likes: 4
From: New Zealand
Sweet
Reply
Old Aug 8, 2010 | 02:56 AM
  #8  
ziad's Avatar
Evolved Member
iTrader: (1)
 
Joined: Apr 2007
Posts: 529
Likes: 1
From: Melbourne
ahh sorry i thought u would just look at the xml from 9653 V7 roms but glad its sorted. but please check to make sure it is doing exactly as it should as i went hunting in IDA and i am not that good. would had a look at the fuel one but didnt have the defination for 9653V7 rom that i had.
Reply
Old Aug 8, 2010 | 04:20 AM
  #9  
leecavturbo's Avatar
Evolved Member
 
Joined: Mar 2008
Posts: 1,392
Likes: 2
From: uk
how would you go about checking ziad?
make some large unjust settings and log? but obviouly not drive it like that
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
honki24
ECU Flash
271
Jan 11, 2024 03:27 PM
mrfred
ECU Flash
264
Nov 30, 2018 02:08 AM
Simon Pugmire
ECU Flash
3
Mar 2, 2017 09:36 PM
Dynotech Tuning
ECU Flash
80
Sep 20, 2016 01:30 PM
prowakeskater
ECU Flash
24
Jan 2, 2012 01:43 AM




All times are GMT -7. The time now is 01:28 AM.