I have an Evo 6 with Evo 8 ECU and others mods, I can loggin all data with the open port 2.0 and AEM wideband all conected to the laptop using Evoscan 2.6. we try to tune it at 0.8 bar and all good, the evoscan shows the data after 4.5k rpm at 159,4 ECU load, climbed the psi to 1 bar and Evoscan still shows the data at 159,4 ECU load, got back to 1.2 bar and the ECU still shows the data at 159,4 ECU load, seems not to recognize more than 159,4 ECU load and it is a problem, because the mixture after 5k rpm is too much rich, which is the problem that the ECU not want to pass after 159,4 ECU load??

Help please!!!

 

My numbers were 335whp at 14psi in a dynojet. I want 22psi but my ECU not reconize more than 159,4 ECU load.

 

You are logging the incorrect load.

You need to log 2byte (or 1byte mod) for your ROM ID.

 

Thanks I am a newbie