1, Can anyone tell me what rpm/speed to gear is?? is it necassary if so what needs to be entered
2, when enabling or disabling tephra options is 1= enable and 0=disable or vice-versa
3, if im just interested in contolling boost as per factory can i just copy my tables into the BOOST ADDER LOAD, MAIN MAP WASTEGATE DUTY AND BOOST DESIRED ENGINE LOAD tables

Thanks.

 

1- It's a ratio you have to determine with a quick log. Values are easy to find for 8/9 evo and 5/6 gearbox on this forum, but check after if it's works fine. I can't give my own values because I'm running a 6RS2 which are slightly different. basically, this allows to manage boost per gear (see tephra mod thread).

2 - Use tephra definition file and pay attention to the description of the bits.

3 - Yes, and all other boost-related tables

 

Thanks for the reply allthough this hasnt actually answered anything

I realise tephra options are enabled or disabled by entering either a 1 or 0 but which way around does entering a 1 enable that option or disable that option?

As for the rpm speed to gear the car is a JDM Evo 7 GSR

 

1 is enabled, 0 is disabled.

For most of the options anyway.

 

if you dont understand that stuff you probably shouldnt be messing with it at all.

 

Not to jack the thread but to the op. Im running v7 and evrytime I flash v7 to the ecu my car starts and dies right away(03VIII. What should i check? Thanks.