There is a decent interest for 7-9; Gruppe-S offers one, which I purchased, and there's another like acd-tuning.com or something as well.. shoot me a PM

 

SBA is great in ACD tune His tarmac map is really great !
Ralliart maps is working well on 7-9 .

 

Thank you for the appreciations!

 

Sabin, can you still use a spare Evo X SAWC ECU?

Still very confused at the stock tables and their meaning with regards to the ACD when looking at the 8/9 rom. Seems like B and C maps are all the same across tarmac/gravel/snow. A maps have the only difference, and I have xml's that callout different titles for the tables. I guess the general consensus is that top bar is G-force (pump voltage too) and the value in the boxes is lockup reducer?

AYC is self explanatory.

Problem is the X has the "AYC brake", which is the ABD that seems to turn the AYC into a real player. Seems like when you push ASC off/off in the X it is time traveling your system back to an 8/9 setup. Looses alot of it's luster too, the oversteer effect from the AYC brake seems to be what everyone is raving about.

Anyone have any plans to read the ASC (ABS) ECU and figure out their interaction? Is there a table on the Evo X ACD/AYC rom that could be controlling it?

 

It is not the ACD, it is TCM for Automatic Transmission
you may also read it @7C38A = TCM-Transm. Crtl

 

I have a Evo X SAWC computer on the way and I can pop the cover and take a pic Hamish, might be a week or two.

 

do you want me to try something hamish

 

I talked with Gems today and they confirmed it works with the stock ECU but with "dash error lights". They also said no on the AYC, how are you getting it to work Rob?

 

yes, yes. that would be awesome. And an ABS computer.. damn how many computers are in this EvoX weighing it down lol.

 

yes please, you can test with a multimeter where all the OBDII pins go to on the ACD/AYC ecu plug pins. Requires locating the ecu, unplugging it, to test for continuity between OBDII 16pins and the Ecu 52pins. Its exactly the same ecu pin layout as the Evo9 ecu.. as seen at the bottom of this page: on the evoscan ACD webpage

 

Sales of aftermarket ACD controllers:
http://www.gems.co.uk/?content=pages&id=evo-acd
http://www.motec.com.au/mdc/mdcfeatures/
http://www.gruppe-s.com/ <- Evo9 ACD only

 

I see a Evo 10 ACD ROM .HEX on the Evoscan site.

 

I don't see it, is it labeled something differently?

 

updated: http://www.gruppe-s.com/ <- Evo9 ACD only, they have no EvoX ACD support.

 

Listed a few here as well;

https://www.evolutionm.net/forums/ev...t9as-read.html