Notices
ECU Flash

Problem with Tephras NLTS patch

Thread Tools
 
Search this Thread
 
Old Apr 19, 2012 | 07:20 PM
  #1  
awdordie's Avatar
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: Dec 2010
Posts: 1,203
Likes: 1
From: tennessee
Problem with Tephras NLTS patch

alright so im having trouble with the nlts, valet mode, and cel flash on knock patch.

i had this working on my old rom id 94170008. tuner just finished tuning the car today and switched me to 94170015. i downloaded the needed 94170015 patched rom for the tephra patch and copied in the xml data needed as i done before. i also copied over EVERYTHING in the tuned tables to the patched rom tables. YES I COPIED THE IMMOBILIZER AND INIT CODE. tried flashing it to the car and the flash worked, i received no error messages, but it did take a considerable amount of time longer than a normal flash. when i tried to start the car all it does is crank? flashed the normal rom back in from the tuner and car starts. anyone have any ideas?
Reply
Old Apr 19, 2012 | 07:44 PM
  #2  
mt057's Avatar
Evolved Member
iTrader: (6)
 
Joined: Apr 2007
Posts: 1,529
Likes: 12
From: DFW
I have had the vallet mode trip after making the switch. Does the CEL blink at all when you try to start it?
Reply
Old Apr 19, 2012 | 08:06 PM
  #3  
awdordie's Avatar
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: Dec 2010
Posts: 1,203
Likes: 1
From: tennessee
i dont think so, the only thing i saw that was blinking was my abs light. but thats a known problem having the cable connected and being below a certain speed. i can try it again tomorrow when i get off work and see if the cel flashes when trying to start the car.

what do you mean the valet mode tripped? even if the valet mode was on shouldnt the car still start since i adjusted its parameters prior to flashing the rom?
Reply
Old Apr 19, 2012 | 10:35 PM
  #4  
DarkerStars's Avatar
Newbie
 
Joined: Jan 2011
Posts: 45
Likes: 0
From: Albuquerque, NM
I know my NLTS and Stationary Rev Limit doesn't work on the Tephra V7.
Reply
Old Apr 20, 2012 | 10:20 PM
  #5  
awdordie's Avatar
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: Dec 2010
Posts: 1,203
Likes: 1
From: tennessee
what exactly is the difference in the 94170008 and 0015 roms? like could i take everything from the 0015 rom they have me on and paste it into the 0008 rom and try the old patch that use to work, or are the tables different? both roms have all the same tables, but are they different when opened up?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mrfred
ECU Flash
375
Jan 28, 2017 09:58 PM
tephra
ECU Flash
982
Aug 19, 2016 10:07 AM
03whitegsr
ECU Flash
19
Oct 17, 2009 10:20 PM
phenem
ECU Flash
72
Jul 11, 2009 08:24 AM
tephra
ECU Flash
453
Mar 18, 2008 06:22 PM




All times are GMT -7. The time now is 03:56 AM.