Deatschwerks 1200cc
The latency info should be included on the flow report.
These are the values in millisecs @ 1v increments
1.7 - 7v
1.5
1.3
0.9
0.6
0.5 - 12v
<0.5
<0.5
<0.5
<0.5
<0.5 - 17v
These values were collected in a lab setting using a direct trigger and simulated fuel pressure. They will likely need some tweaking to get everything dialed in. Should give your tuner a good starting point.
These are the values in millisecs @ 1v increments
1.7 - 7v
1.5
1.3
0.9
0.6
0.5 - 12v
<0.5
<0.5
<0.5
<0.5
<0.5 - 17v
These values were collected in a lab setting using a direct trigger and simulated fuel pressure. They will likely need some tweaking to get everything dialed in. Should give your tuner a good starting point.
EvoM Guru
iTrader: (50)
Joined: Mar 2006
Posts: 9,675
Likes: 132
From: Tri-Cities, WA // Portland, OR
The latency info should be included on the flow report.
These are the values in millisecs @ 1v increments
1.7 - 7v
1.5
1.3
0.9
0.6
0.5 - 12v
<0.5
<0.5
<0.5
<0.5
<0.5 - 17v
These values were collected in a lab setting using a direct trigger and simulated fuel pressure. They will likely need some tweaking to get everything dialed in. Should give your tuner a good starting point.
These are the values in millisecs @ 1v increments
1.7 - 7v
1.5
1.3
0.9
0.6
0.5 - 12v
<0.5
<0.5
<0.5
<0.5
<0.5 - 17v
These values were collected in a lab setting using a direct trigger and simulated fuel pressure. They will likely need some tweaking to get everything dialed in. Should give your tuner a good starting point.
Thread
Thread Starter
Forum
Replies
Last Post
FS[West]: 800cc deatschwerks injectors
gptoyz
For Sale - Engine / Drivetrain / Power
3
Mar 22, 2016 08:44 AM
EVOXMAINE
For Sale - Engine / Drivetrain / Power
15
Dec 23, 2011 10:54 AM
