Hitting Boost Cut On MBC
#1
Evolving Member
Thread Starter
Hitting Boost Cut On MBC
So I am currently using a Hallman Pro RX Manual Boost Controller, and I am hitting boost cut everytime I exceed something around 320 load
This is what my boost limit table looks like. Why are these values in percentage, is there anyway I can change them to load?
Note: My car has only a MAF sensor and no MAP sensor
This is what my boost limit table looks like. Why are these values in percentage, is there anyway I can change them to load?
Note: My car has only a MAF sensor and no MAP sensor
#3
Tariq... if you have not played around with your maf scaling then 320 load is well over 2 bar
the values you see there are load values... 230 translates to something like 1.3 or 1.4 bar...
thats why why you are hitting boost cut...
the values you see there are load values... 230 translates to something like 1.3 or 1.4 bar...
thats why why you are hitting boost cut...
#4
Evolving Member
Thread Starter
Also, if those are load values, how come I am hitting the cut at 320 rather than 230?
Thread
Thread Starter
Forum
Replies
Last Post
Thugline
Evo Engine / Turbo / Drivetrain
17
Apr 26, 2010 04:42 AM
ebbeast2005
Evo Engine / Turbo / Drivetrain
13
Oct 7, 2004 01:02 PM
DynoFlash
Evo Engine / Turbo / Drivetrain
7
Oct 29, 2003 09:40 PM