What to use for DataLogging
#151
evo4mad, I'll happily get my Evo IX FQ340 (with S-AYC) along some of the twistiest, bumpiest tarmac in the world (Scotland) as soon as you post the software and post the logs for your verification. Deserted, undulating roads with crazy cambers, be rude not to have an excuse to go and do it I also have lots of questions to answer from logging re load sites and ignition timing.
#152
EvoM Guru
iTrader: (5)
Originally Posted by evo4mad
I am working on the program all afternoon today, lets see if I can get a version out to you guys asap, my car still needs a new waterpump installed, I took the waterpump off yesterday, struggling to source a new one, hopefully Tuesday I will get the new waterpump on.
It would be good to get my car going to verify the AYC and ABS g-force sensor data. Maybe I can disable those loggers for an initial release.
Check back this afternoon for some new screenshots..
It would be good to get my car going to verify the AYC and ABS g-force sensor data. Maybe I can disable those loggers for an initial release.
Check back this afternoon for some new screenshots..
#153
Evolved Member
iTrader: (19)
Join Date: Oct 2004
Location: CT
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MalibuJack
My car has the AYC (Active Yaw Control) and ABS G-Force sensors if you want me to check it out for you.
#154
EvoM Guru
iTrader: (5)
Originally Posted by chmodlf
How so I thought that the 03s did not have the AYC? Did you add it?
My car was early enough to have all the control modules for AYC with no actual function, my car lacks the ACD which is required for it to function.
#155
Evolved Member
iTrader: (4)
Originally Posted by MalibuJack
Oops, it was a brain fart on my part.. I was thinking EBD which is what the primary function of the ABS G-Sensors is for..
My car was early enough to have all the control modules for AYC with no actual function, my car lacks the ACD which is required for it to function.
My car was early enough to have all the control modules for AYC with no actual function, my car lacks the ACD which is required for it to function.
#158
Originally Posted by PDXEvo
I had problems with the tuner pro, so Im not a big fan of the unit. Specifically, it was difficult to keep the O2 sensor calibrated more then a couple of days, regardless of the O2 sensor. The box, however, was one of the originals (Purchased 3 years ago) and I am certain that they would have fixed the poor electronics used in rev 1 by now.
I was also looking at a similar device from Zeitronix. Anyone use the Zeitronix logger? Or the Innovate logger?
I was also looking at a similar device from Zeitronix. Anyone use the Zeitronix logger? Or the Innovate logger?
Also, ... There are a lot of orphaned UTEC's out there going pretty cheap, for more read outs (along with the AFR using any of the TXS Tuners. - everything appears on one readout that way)
Just a thought
#159
Evolved Member
iTrader: (44)
Join Date: Oct 2003
Location: Charleston, WV
Posts: 4,409
Likes: 0
Received 0 Likes
on
0 Posts
Any news on the ecuflash logging software? I really wish I could sign up on openecu forums but I never get the emails :\
I'm just wondering what I should do about logging knock still.... Should I wait for this free/cheap software or should I spend around 100 on the vinshu piece?
I'm just wondering what I should do about logging knock still.... Should I wait for this free/cheap software or should I spend around 100 on the vinshu piece?
#160
Account Disabled
iTrader: (465)
Originally Posted by nirvevo
Well, I hope that I don't jinx myself here, but I've had my TXS Pro in for a few months now, and it works flawlessly (to the best of my knowlege) The VW sensor seems fine for the average tuner/user application.
Also, ... There are a lot of orphaned UTEC's out there going pretty cheap, for more read outs (along with the AFR using any of the TXS Tuners. - everything appears on one readout that way)
Just a thought
Also, ... There are a lot of orphaned UTEC's out there going pretty cheap, for more read outs (along with the AFR using any of the TXS Tuners. - everything appears on one readout that way)
Just a thought
#165
Evolved Member
iTrader: (26)
Join Date: Oct 2005
Location: Pittsburgh
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JeffR116
Any updates? Last we heard from evo4mad was almost a week ago.
I'm ready to pay $15 for this.
I'm ready to pay $15 for this.
Thread
Thread Starter
Forum
Replies
Last Post