i was trying to upload a flash from another evo9 to my evo9 the thing is that i flashed the car know the car wont start what do i do?
i tried burning the oem.hex file back to the car but it gives me an error to see the log file?
i need help
thanks guys

 

Did you pull the stock rom first? Did you copy over the immobilizer number?

 

mrturco i pulled the stock rom first i have it saved the thing is that i didnt copy over the immobilizer number know what do i do?

 

iam know copying the inmbolizer code but the thing is that ecuflash says an error has occured when i try to burn it back to the ecu?

 

is the battery dead from trying to start it too many times? Try to jump the battery from a running car, wait 5 minutes and try to write the rom again.

 

mr turco the battery is ok
i will wait 5 min and i will burn up the oem.hex
ok

 

Copy the text from ecuflash where it failed, in the log section on the right of the table list.

 

ok what i did right know was that i tried to read the rom in the ecu this is what it gave me:


[16:53:02.680] Using interface OpenPort 1.3 Mitsubishi TX35YQfo3484f6d5f39ef7d1fffefa8325ac762852c395e3
[16:53:05.135] sending init sequence 1 (0001)
[16:53:08.427] sending init sequence 1 (0003)
[16:53:11.718] sending init sequence 1 (FFFF)
[16:53:14.479] no response to any known code
[16:53:14.479] interface close

 

why wont it respond to any code i cant even read the new hex that i burned?

 

Battery isn't charged enough or the car isn't in the On position-not started

 

If he has the wrong security code loaded, will the ECU even recognize that the key is in the on position? I thought that this was the great danger of just uploading someone else's ROM without changing the security code...

Keith

 

car wont start but you can flash as far as i know. the "great danger" is writing a rom over the stock rom without pulling it first which means you just wrote over the immobilizer code.

 

so what do you guys mean the battery is fulled up

which is the security code your talking about?

 

nope it wont flash nothing it wont even read the rom that i uploaded why is this??

 

its because the battery is to low.... like people have been saying. throw a charger on it, turn off any stereo stuff and try again. if that doesn't help check your fuses. i've popped a fuse from turning a car off in the middle of a flash on accident.