Connection Error
#1
Evolved Member
Thread Starter
iTrader: (26)
Join Date: Nov 2005
Location: San Diego, CA
Posts: 717
Likes: 0
Received 0 Likes
on
0 Posts
Connection Error
I keep getting an initialization error and the cable won't connect to read or write to the ECU. It tries to connect 3 times and then errors out. It used to work, but I haven't used the car in 9 months since I was putting it back to stock. Some of the ECU wires had to be taped off since I tapped into them, but I don't see this being related.
I did a search and found out it could a plethora of things: bad cable (tried friends newer v1.3u cable on v1.42 with same issue), low voltage battery (started the car and tried connecting), wrong software version (v1.3m cable so I'm using v1.29a), ecu unlocker software (mine isn't but tried it anyways), etc. I tried it all and nothing works. I know the cable works since I can run the OBD2 software, connect, and reset CEL's. I tried the rest to no avail.
Any other suggestions? I need to get into the ECU since the car is back to stock, but the flash is not.
I did a search and found out it could a plethora of things: bad cable (tried friends newer v1.3u cable on v1.42 with same issue), low voltage battery (started the car and tried connecting), wrong software version (v1.3m cable so I'm using v1.29a), ecu unlocker software (mine isn't but tried it anyways), etc. I tried it all and nothing works. I know the cable works since I can run the OBD2 software, connect, and reset CEL's. I tried the rest to no avail.
Any other suggestions? I need to get into the ECU since the car is back to stock, but the flash is not.
Last edited by silex; Feb 24, 2010 at 12:55 PM.
Trending Topics
#13
Evolved Member
iTrader: (51)
Join Date: Feb 2010
Location: San Antonio
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
I keep getting an initialization error and the cable won't connect to read or write to the ECU. It tries to connect 3 times and then errors out. It used to work, but I haven't used the car in 9 months since I was putting it back to stock. Some of the ECU wires had to be taped off since I tapped into them, but I don't see this being related.
I did a search and found out it could a plethora of things: bad cable (tried friends newer v1.3u cable on v1.42 with same issue), low voltage battery (started the car and tried connecting), wrong software version (v1.3m cable so I'm using v1.29a), ecu unlocker software (mine isn't but tried it anyways), etc. I tried it all and nothing works. I know the cable works since I can run the OBD2 software, connect, and reset CEL's. I tried the rest to no avail.
Any other suggestions? I need to get into the ECU since the car is back to stock, but the flash is not.
I did a search and found out it could a plethora of things: bad cable (tried friends newer v1.3u cable on v1.42 with same issue), low voltage battery (started the car and tried connecting), wrong software version (v1.3m cable so I'm using v1.29a), ecu unlocker software (mine isn't but tried it anyways), etc. I tried it all and nothing works. I know the cable works since I can run the OBD2 software, connect, and reset CEL's. I tried the rest to no avail.
Any other suggestions? I need to get into the ECU since the car is back to stock, but the flash is not.
#14
Evolved Member
Thread Starter
iTrader: (26)
Join Date: Nov 2005
Location: San Diego, CA
Posts: 717
Likes: 0
Received 0 Likes
on
0 Posts
I appreciate the help guys. This is why I decided to keep the car and stay in the Evo family
I forgot to mention this, but this was the first thing I tried and it did not work. Then again, the battery was "dead" at the time so hooking up the battery might not have gotten it juiced up enough. The battery now starts the car on its own after trickle charging it for a few nights so I might have to try this method out now with the charger in starter mode.
I will try fostytou's suggestion, but other than the above I have no other clue.
I will try fostytou's suggestion, but other than the above I have no other clue.
#15
Evolving Member
iTrader: (7)
since i haven't been back in the states for a while, i haven't dove into this issue (or anything evo related lol) at all--but--flashing in EVOSCAN always works when i have your issue. seems like ECUFLASH times out/doesn't init for one reason or another.
actually, EVOSCAN has never failed on a flash attempt for me.
just some food for thought...i know you may not have that option as EVOSCAN is not free.
the fix may already have been covered here.
if you have or have a friend with EVOSCAN, try it out. you guys will probably figure it out before i get back.
actually, EVOSCAN has never failed on a flash attempt for me.
just some food for thought...i know you may not have that option as EVOSCAN is not free.
the fix may already have been covered here.
if you have or have a friend with EVOSCAN, try it out. you guys will probably figure it out before i get back.