Openport 2.0, SD Card logging and logcfg.txt
#1
Newbie
Thread Starter
Join Date: Jun 2010
Location: NZ
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Openport 2.0, SD Card logging and logcfg.txt
Hi guys
Just trying to figure out how to use the SD card logging feature of openport 2.0..
After doing some search, I figured that you need to put logcfg.txt in the root directory of the sd card, and that file holds information of what should be logged.
I have found a sample logcfg.txt file for an Evo10, which I assume will be different than Evo 9. My looking at the file, it seems like it specifies memory address which it should read from. Is this correct? if it is, how do I figure out what to log?
Is there anyone who got the sd card logging to work on an Evo 9?
Or could anyone post a sample logcfg.txt file for an evo 9 please
Just trying to figure out how to use the SD card logging feature of openport 2.0..
After doing some search, I figured that you need to put logcfg.txt in the root directory of the sd card, and that file holds information of what should be logged.
I have found a sample logcfg.txt file for an Evo10, which I assume will be different than Evo 9. My looking at the file, it seems like it specifies memory address which it should read from. Is this correct? if it is, how do I figure out what to log?
Is there anyone who got the sd card logging to work on an Evo 9?
Or could anyone post a sample logcfg.txt file for an evo 9 please
#3
Newbie
Thread Starter
Join Date: Jun 2010
Location: NZ
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
thanks so much for the file.
In your file, i see a parameter below-
paramname=WBO2
paramid=0x3C
scalingrpn=x,0.0392156863,*,9.6,+
is that for logging AFR from a wideband? if so, how do you hook up your wide band with openport2.0?
Thanks in advance, so nice to see people who are willing to help in the evo scene..!
In your file, i see a parameter below-
paramname=WBO2
paramid=0x3C
scalingrpn=x,0.0392156863,*,9.6,+
is that for logging AFR from a wideband? if so, how do you hook up your wide band with openport2.0?
Thanks in advance, so nice to see people who are willing to help in the evo scene..!
#4
Evolving Member
iTrader: (3)
Even though you asked not me, I can tell you the answer. WBO2 is wired directly into the ECU in the RearO2 ADC. This way you can easily log AFR from WBO2 along with other parameters from the ECU.
As well in this case you can use the WBO2 for the AFR safety feature in Tephra ROMs.
As well in this case you can use the WBO2 for the AFR safety feature in Tephra ROMs.
thanks so much for the file.
In your file, i see a parameter below-
paramname=WBO2
paramid=0x3C
scalingrpn=x,0.0392156863,*,9.6,+
is that for logging AFR from a wideband? if so, how do you hook up your wide band with openport2.0?
Thanks in advance, so nice to see people who are willing to help in the evo scene..!
In your file, i see a parameter below-
paramname=WBO2
paramid=0x3C
scalingrpn=x,0.0392156863,*,9.6,+
is that for logging AFR from a wideband? if so, how do you hook up your wide band with openport2.0?
Thanks in advance, so nice to see people who are willing to help in the evo scene..!
#5
#6
Evolving Member
iTrader: (3)
Firmware update is included in the new versions of Ecuflash, for example 1.43.3150beta include firmware update for the OP2 as well.
Source - http://www.tactrix.com/index.php?opt...d=44&Itemid=65
Source - http://www.tactrix.com/index.php?opt...d=44&Itemid=65
Trending Topics
#9
Evolving Member
iTrader: (3)
Join Date: Oct 2009
Location: Isanti, MN
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
So all you have to do is place the lofcfg.txt file above in the root directory of the micro SD card, load "Mode 23" onto your XML file (Is it the same code for an 8/9 as it is a X?), have the beta ECU FLash 1.43.1350 and you are good to go?
Am I missing something?
Am I missing something?
Last edited by goodhart; Mar 23, 2011 at 06:49 PM.
#10
Evolving Member
iTrader: (3)
Join Date: Oct 2009
Location: Isanti, MN
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Also, what triggers are you guys using? Or are you just going from start to stop? I know the X guys use the cruise control. Is there anyway possible we could use something like the rear defrost or something to trigger?
There needs to be a how-to for this!
There needs to be a how-to for this!
Last edited by goodhart; Mar 23, 2011 at 08:25 AM.
#11
I have latest Beta, but how do I update the firmware on the OP2 still not clear for me, sorry What are the steps after opening the Ecuflash program?
Firmware update is included in the new versions of Ecuflash, for example 1.43.3150beta include firmware update for the OP2 as well.
Source - http://www.tactrix.com/index.php?opt...d=44&Itemid=65
Source - http://www.tactrix.com/index.php?opt...d=44&Itemid=65
#12
EvoM Guru
iTrader: (6)
Yes it makes going through the logs to find what you need more difficult, but its better to have more information than less.
If you only wanted to capture WOT logs, you could just trigger on TPS.
I guess you could wire up a switch to the ECU if you really wanted a seperate trigger device..