Official 3rd gear Street Pull - Data Thread
Thread Starter
Evolved Member
iTrader: (62)
Joined: Feb 2004
Posts: 3,336
Likes: 6
From: Redmond - Lake Tapps ,WA
Most guys run Evoscan for the datalogging and Data Log Labs to create the HP/TQ graphs from the Evoscan data.
There are excel spreadsheets and other ways to do it, but DLL is pretty much click and go.
There are excel spreadsheets and other ways to do it, but DLL is pretty much click and go.
Nice thread
evo 8
stock bottom end / cyl. head
cosi m2 @ +2in/0exh
fp-red w-fp w/g act.
MR bov
MIL.SPEC ported exh mani, hotside, LICP, 3" DP, 65mm tb
weapon R int. mani
91 octane
aem ecu w/MIL.SPEC tune
This is some early data with the red, as i am at work & have limited data here....hence the wavy boost.

evo 8
stock bottom end / cyl. head
cosi m2 @ +2in/0exh
fp-red w-fp w/g act.
MR bov
MIL.SPEC ported exh mani, hotside, LICP, 3" DP, 65mm tb
weapon R int. mani
91 octane
aem ecu w/MIL.SPEC tune
This is some early data with the red, as i am at work & have limited data here....hence the wavy boost.
Here is the full .csv log of a 3582HTA on pump. This was a 3rd gear pull from pretty low to get the fullest log possible, the car has been converted to SD. It is a 9:1 2.0L with ported head and GSC S2s.
Last edited by JohnBradley; Jun 2, 2009 at 06:53 PM.
aaron
Thread Starter
Evolved Member
iTrader: (62)
Joined: Feb 2004
Posts: 3,336
Likes: 6
From: Redmond - Lake Tapps ,WA








