Notices
Evo Dyno Tuning / Results Discuss vendor and member dyno tuning techniques, results and graphs.

DG Motors "FP RED" Evo 9 Tuned..

Thread Tools
 
Search this Thread
 
Old Apr 17, 2009 | 06:20 AM
  #1  
DG Motors's Avatar
Thread Starter
Former Sponsor
iTrader: (6)
 
Joined: Jan 2007
Posts: 1,840
Likes: 0
From: long island
DG Motors "FP RED" Evo 9 Tuned..

Had a nice little build on beautiful evo 9 rs we just finished up. Customer wants to remain unknown until he gets a few days of driving the car before posting up a review. Most of you know about the dyno comparison that was made thanks to 4kinboost a few months ago. I think last nights tuning session went well and needless to say the power output was short of amazing.

Mods:
Fp red
gsc s2 cams
gsc springs/retainers
ported stock exhaust/intake manifold
ported stock t-body
ets 4" IC w/ IC pipes
Act clutch
3" tbe
ets intake

Stock bottom end
stock ecu

Tuned by Kreionic

Here are the results at 25psi/93octane


Take into consideration the customer base lined his old setup with the stock turbo/tune and made 320whp and went 11.803 at 117 with a 1.71 60ft.

Here's the video:
http://www.youtube.com/watch?v=crgAa9P1N5s
Old Apr 17, 2009 | 06:52 AM
  #2  
tumtum411's Avatar
Evolving Member
 
Joined: Jan 2008
Posts: 345
Likes: 0
From: bronx
pretty good
Old Apr 17, 2009 | 09:15 AM
  #3  
Daryl Nilsen's Avatar
Newbie
iTrader: (4)
 
Joined: May 2007
Posts: 72
Likes: 0
From: Detroit
Take into consideration the customer base lined his old setup with the stock turbo/tune and made 320whp and went 11.803 at 117 with a 1.71 60ft.
Woa thats solid, i wonder what his new times will be. Good results, did you guys run into any boost creep problems by only running 25psi?
Old Apr 17, 2009 | 09:36 AM
  #4  
DG Motors's Avatar
Thread Starter
Former Sponsor
iTrader: (6)
 
Joined: Jan 2007
Posts: 1,840
Likes: 0
From: long island
Originally Posted by Daryl Nilsen
Woa thats solid, i wonder what his new times will be. Good results, did you guys run into any boost creep problems by only running 25psi?
Yes, our dyno reads low compared to most but track times back the numbers up.. Very minor boost creep, infact maybe 1psi then evens out. This turbo holds 25psi to 7,000 then tapers to 23 at 7800.
Old Apr 17, 2009 | 10:14 AM
  #5  
FraziersEVO's Avatar
Evolving Member
iTrader: (5)
 
Joined: Nov 2008
Posts: 105
Likes: 0
From: Fort Lauderdale,Fl.
Nice numbers,he should be low 11's with those numbers right? An extra 70hp from what he had when he ran 11.80's and trapped 117mph sounds about right.
Old Apr 17, 2009 | 10:33 AM
  #6  
red03evo's Avatar
Evolved Member
iTrader: (20)
 
Joined: Apr 2007
Posts: 982
Likes: 0
From: Fairfax
Good #'s.

Who is this Kreionic guy you speak of?








Just joking, charlie's a good guy.
Old Apr 17, 2009 | 12:01 PM
  #7  
DG Motors's Avatar
Thread Starter
Former Sponsor
iTrader: (6)
 
Joined: Jan 2007
Posts: 1,840
Likes: 0
From: long island
Originally Posted by FraziersEVO
Nice numbers,he should be low 11's with those numbers right? An extra 70hp from what he had when he ran 11.80's and trapped 117mph sounds about right.
Yes, low low low 11's. We will see shortly..
Old Apr 17, 2009 | 12:20 PM
  #8  
krisdlm's Avatar
Evolving Member
iTrader: (17)
 
Joined: Mar 2009
Posts: 421
Likes: 0
From: US
good #s, almost @ the 400 mark
Old Apr 17, 2009 | 03:15 PM
  #9  
nikkadanny's Avatar
Evolved Member
iTrader: (31)
 
Joined: Oct 2005
Posts: 2,106
Likes: 1
From: fort worth, tx
nice power!
Old Apr 17, 2009 | 04:20 PM
  #10  
DG Motors's Avatar
Thread Starter
Former Sponsor
iTrader: (6)
 
Joined: Jan 2007
Posts: 1,840
Likes: 0
From: long island
Originally Posted by krisdlm
good #s, almost @ the 400 mark
Yea 400 would have been nice but that is about all she wrote at 25psi and 93octane where we felt safe with the car. If you have not looked at the dyno comparison 4kinboost made then check it out. This car is right at the 500whp mark on 25psi and 93octane on a dynojet.
Old Apr 18, 2009 | 11:36 PM
  #11  
Evo a Mula's Avatar
Account Disabled
iTrader: (10)
 
Joined: Sep 2008
Posts: 1,819
Likes: 0
From: bayshore ny
DG does it again nice numbers at 1st you guys dyno scared me but know i love telling people i have 219 whp and being about to run low 13z and have people tell me i have more whp then that then i show them my dyno numbers and watch the hate
Old Apr 19, 2009 | 10:13 AM
  #12  
EvoDom's Avatar
Evolved Member
iTrader: (7)
 
Joined: Oct 2007
Posts: 1,238
Likes: 0
From: Joisey Shore
Originally Posted by DG Motors
Yea 400 would have been nice but that is about all she wrote at 25psi and 93octane where we felt safe with the car. If you have not looked at the dyno comparison 4kinboost made then check it out. This car is right at the 500whp mark on 25psi and 93octane on a dynojet.

fp red cars are only making about 430awhp on dynojets on 25psi on 93 octane......i dont think with the listed mods without meth or race fuel is going to get you near 500awhp.

but other than thta 390 on your dyno is about right to the 430 on a dynojet .....good job brotha.

great numbers
Old Apr 19, 2009 | 10:28 AM
  #13  
PVD04's Avatar
Evolved Member
iTrader: (23)
 
Joined: Jun 2004
Posts: 1,503
Likes: 0
From: Wisconsin
Originally Posted by EvoDom
fp red cars are only making about 430awhp on dynojets on 25psi on 93 octane......i dont think with the listed mods without meth or race fuel is going to get you near 500awhp.

but other than thta 390 on your dyno is about right to the 430 on a dynojet .....good job brotha.

great numbers
390 on their dyno is right around 500 on a dynojet.

https://www.evolutionm.net/forums/ev...-round-xx.html
Old Apr 19, 2009 | 11:00 AM
  #14  
MissionSk8r21's Avatar
Newbie
iTrader: (4)
 
Joined: Feb 2009
Posts: 61
Likes: 0
From: Bartlett, IL
seems to me the fp red needs high octane fuel and alot of boost to really shine. Doesnt the fp green make these numbers with the same boost/mods?

eitherway, graph looks solid.
Old Apr 19, 2009 | 11:41 AM
  #15  
ernald711's Avatar
Evolved Member
iTrader: (26)
 
Joined: Jul 2006
Posts: 703
Likes: 0
From: Oak Harbor, WA



All times are GMT -7. The time now is 03:32 PM.