New Evo Owner w/ Baseline Numbers
#1
Evolving Member
Thread Starter
iTrader: (12)
Join Date: Apr 2009
Location: Virginia
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
New Evo Owner w/ Baseline Numbers
So a few weeks ago I did a baseline on my car at Mach V Motorsports on their dyno day. The car made peak 250.81 HP/244.94 TRQ
A few days ago I installed the Complete Perrin Intake system and today I went and dyno'd again on the same Dyno Jet at Mach V. Just wanted to share my results with everyone. Keep in mind these results are untuned and everything is stock besides the Perrin Intake kit. In the picture, the blue lines are baseline stock and the red line is with the perrin intake.
Picture of the car
Dyno results
A few days ago I installed the Complete Perrin Intake system and today I went and dyno'd again on the same Dyno Jet at Mach V. Just wanted to share my results with everyone. Keep in mind these results are untuned and everything is stock besides the Perrin Intake kit. In the picture, the blue lines are baseline stock and the red line is with the perrin intake.
Picture of the car
Dyno results
#4
Evolving Member
Thread Starter
iTrader: (12)
Join Date: Apr 2009
Location: Virginia
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
On the vehicle they tested it on it pulled close to 35 more HP with the intake and no tune. The vehicle they tested it on was already pushing 311 horsepower. With the intake it did 341 and picked up 2.7 more pounds of boost from just the intake proving how much less restrictive their intake is. I'm sure if I had other supporting mods like TBE and such my gains would have been much more significant.
Trending Topics
#12
Evolved Member
iTrader: (31)
Join Date: Jan 2007
Location: Under my car
Posts: 766
Likes: 0
Received 0 Likes
on
0 Posts
We have a deal at a local shop that deals with Evo's.Its 350 and free tunes for life of the car.That means if he adds a FMIC 6 months from now he gets a free tune,Add a TBE free tune etc etc.