My mods are in the first post. So yes this was on a stock intake manifold, stock throttle body. Only mods to the engine are comp280s and arp head studs.

 

Well that bums me out a little. I plan on doing a similar build with mine with a 6262R and I have only HKS 272 cams for my car. I guess I will have to use more boost to make the power I want. Thanks for the info.

 

No you don't how much power are you looking to make??And is your block stock?

 

I doubt it. This is a non hta 6152, its a non gt turbine wheel and a small compressor cover and small exhaust housing. A 6262r with a sp. cover and .82 housing will kill this turbo's numbers even with smaller cams

 

I was looking for similar #'s but with 272's on e85. 500whp at 30psi was the goal. Maybe the 62 will do it, but my 6152E made 603whp at 31psi so i didnt think the turbo would have a problem suppying the air if the motor would ingest it. At only 23psi my talon did 487whp. Hopefully i will be pleasantly surprised.

 

Batty you should be fine to make over 500whp at 30psi on E85 as long as you have the supporting fuel system and a good tune, that seems very reasonable. The 6262 is a great turbo, its very efficient.