HKS GT7460 GTII Original Turbine, tested at Iveytune.
#346
Evolving Member
Join Date: Jul 2006
Location: New Zealand
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
your links don't work FYI.
But I searched. AWD Bastards car is the only one you list on E85...and its a 2.4L
I searched for E85 results from GST for the BBk and they were making between 425 and 435whp on a MD ~ 488 to 500 DJ whp So for a FAIR comparison 2.0L to 2.0L would be seeing the HKS 7460 put down 500whp on E85.
And if you wait a little bit... I'm confident I'll be able to do every bit of 500whp.
** I'm not saying that the HKS turbo is larger or smaller** I'm saying they're very similar...and unitl some one goes ***** out on E85 with the HKS turbo... we won't know quite for sure.
But I searched. AWD Bastards car is the only one you list on E85...and its a 2.4L
I searched for E85 results from GST for the BBk and they were making between 425 and 435whp on a MD ~ 488 to 500 DJ whp So for a FAIR comparison 2.0L to 2.0L would be seeing the HKS 7460 put down 500whp on E85.
And if you wait a little bit... I'm confident I'll be able to do every bit of 500whp.
** I'm not saying that the HKS turbo is larger or smaller** I'm saying they're very similar...and unitl some one goes ***** out on E85 with the HKS turbo... we won't know quite for sure.
Sorry 2.4 apples vs oranges
Yep so if you acheived 500whp on the hks turbo on dynojet you would be in same ballpark.. because of dif mods etc
If this acheives the same if not better power with better response we have a winner.. Looking foward to seeing your results
#348
Evolved Member
iTrader: (11)
Crower doesn't seem to have a good rep on this forum--based on their cam designs, they apparently dont put down the power, they just aren't as aggressive as other profiles--As for the retainers, well you have options as you can tell, the BC's are less then anyone elses so that point is mute--a TI retainer is going to cost you no matter who's you buy. Now BC is the only vendor who does a chromoly DSM retainer at a fraction of the cost of TI--but they don't appear to be readily available. Take the info for what its worth.
#349
Former Sponsor
iTrader: (12)
Join Date: Jun 2007
Location: Linden NJ
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
If anybody is interested in some nice Ti retainers for these springs we have some nice Manley Ti ones in stock.
165 Shipped if the Turbo/Cam package isn't bought through us, 160 if you did.
Sam
165 Shipped if the Turbo/Cam package isn't bought through us, 160 if you did.
Sam
#351
Evolved Member
iTrader: (33)
Join Date: Jul 2002
Location: Raleigh, Transplanted from Toronto, Canada
Posts: 5,313
Likes: 0
Received 1 Like
on
1 Post
Sam can you send me a paypal sale request to h__@qualcomm.com. i need a set of those retainers. I didn't buy my HKS through you guys but since you know EXACTLY what I need I'd just as soon buy it through you guys.
#352
Evolved Member
iTrader: (33)
Join Date: Jul 2002
Location: Raleigh, Transplanted from Toronto, Canada
Posts: 5,313
Likes: 0
Received 1 Like
on
1 Post
Should work now..
Sorry 2.4 apples vs oranges
Yep so if you acheived 500whp on the hks turbo on dynojet you would be in same ballpark.. because of dif mods etc
If this acheives the same if not better power with better response we have a winner.. Looking foward to seeing your results
Sorry 2.4 apples vs oranges
Yep so if you acheived 500whp on the hks turbo on dynojet you would be in same ballpark.. because of dif mods etc
If this acheives the same if not better power with better response we have a winner.. Looking foward to seeing your results
#353
Former Sponsor
iTrader: (12)
Join Date: Jun 2007
Location: Linden NJ
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
Smurf we do not accept paypal, shoot me an email at sales@iveytune.com and I will send you a CC authorization form.
I can have them shipped out tomorrow AM.
Sam
I can have them shipped out tomorrow AM.
Sam
#356
Evolved Member
iTrader: (25)
Join Date: Jan 2004
Location: San Diego
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
Mil.Spec is doing my porting, but they don't do porting anymore for the public. The inside of the hotside is pretty rough, so I wanted to smooth out the inside for better exhaust flow / response.