BBK Full, Pump Gas, 26 psi
Is that a flat 26 psi all the way? Not sure if it's just my case but the full seems to keep delivering proportional to boost beyond 26 psi, like 28 or even 29 psi, so long as you let redline taper to 26 psi.
Thread Starter
Evolving Member
iTrader: (15)
Joined: Oct 2010
Posts: 402
Likes: 0
From: L.I. New York
hey guys. Thanks for the compliments.
I'm a newb here so bare with me.
Not sure what you mean concerining psi. All's I know is that car's prior tune was 26 and no change after John was finished with the tune.
Correction factor is what baseline vs post tune?
Mark
I'm a newb here so bare with me.
Not sure what you mean concerining psi. All's I know is that car's prior tune was 26 and no change after John was finished with the tune.
Correction factor is what baseline vs post tune?
Mark
Trending Topics
Thread Starter
Evolving Member
iTrader: (15)
Joined: Oct 2010
Posts: 402
Likes: 0
From: L.I. New York
I's have to ask the shop owner about Shootout mode. I doubt though, based upon lower half of link. Proof of integrity....
http://www.xspeed.com.au/tech_features.php?tech_id=19
Also, there was another EVO 8 getting tuned with the same setup as mine but WITHOUT the grimspeed ebc.
Car made 420 whp.
I was told by owner of this car the grimspeed ebc made all the difference. Something about being able to hold boost...
I'm quite happy with the results.
http://www.xspeed.com.au/tech_features.php?tech_id=19
Also, there was another EVO 8 getting tuned with the same setup as mine but WITHOUT the grimspeed ebc.
Car made 420 whp.
I was told by owner of this car the grimspeed ebc made all the difference. Something about being able to hold boost...
I'm quite happy with the results.

This thread keeps making me go back and forth on BBK full or -B.
My goal is 500 whp with e-85. Looks doable now.
You and your tuner have complicated and helped my decision all at the same time.
CBRD's options make it difficult both are really good choices.
Ben
Shootout HP will break your heart
Shootout SHP will be "similar" to a Dynojet output.
Looks strong either way



