Notices
Evo Dyno Tuning / Results Discuss vendor and member dyno tuning techniques, results and graphs.

my first dyno

Thread Tools
 
Search this Thread
 
Old Mar 5, 2011 | 08:09 PM
  #1  
lockadam2112's Avatar
Thread Starter
Evolving Member
iTrader: (8)
 
Joined: Aug 2007
Posts: 217
Likes: 0
From: colorado
my first dyno

well I went to the dyno for the first time and I put on 266hp/272tq on a mustang dyno my mods are....

Intake
3' TBE
Injen hardpipe kit
Stock evo 8 turbo
Hks 272 cams
Big al tune
Spoonlin up COP non CDI
Old Mar 6, 2011 | 07:13 AM
  #2  
BoostINurI's Avatar
Evolving Member
iTrader: (4)
 
Joined: May 2007
Posts: 459
Likes: 0
From: colorado springs
Not bad man....get a better tuner/ tune on there is my only complaint....but you have a good start.
Old Mar 6, 2011 | 08:11 AM
  #3  
bryanf's Avatar
Evolving Member
iTrader: (8)
 
Joined: Feb 2010
Posts: 171
Likes: 1
From: Huntington Beach, CA
Good #s. How did you like the spoolin up cop? I'm still on the fence on weather I should buy one before my tune or not.

Bryan
Old Mar 6, 2011 | 08:27 AM
  #4  
wht95scort's Avatar
Evolving Member
iTrader: (25)
 
Joined: Sep 2007
Posts: 328
Likes: 23
From: NJ
Those numbers seem low to me for those mods. I saw a few stock cars put down 240ish. What is you boost set to?
Old Mar 6, 2011 | 09:01 AM
  #5  
bryanf's Avatar
Evolving Member
iTrader: (8)
 
Joined: Feb 2010
Posts: 171
Likes: 1
From: Huntington Beach, CA
Originally Posted by wht95scort
Those numbers seem low to me for those mods. I saw a few stock cars put down 240ish. What is you boost set to?
What dyno where they on? I thought these were ok for a mustang dyno considering they read lower, Also a stock 8 turbo too.

Bryan
Old Mar 6, 2011 | 09:21 AM
  #6  
sirsol's Avatar
Evolving Member
iTrader: (18)
 
Joined: Jul 2010
Posts: 241
Likes: 0
From: Michigan
It is VERY dependant on the actual dyno, correction used, etc. but those are a tad low for a mustang dyno. My car made 301/283 on buschur's mustang dyno, with an intake filter, 3" turbo back (ebay), ETS V2 licp, stock cams, stock 8 turbo, on 91 octane. Again though, it really depends on the dyno. Ask the tuner how much a stock car makes on that dyno so we can get a baseline.
Old Mar 6, 2011 | 10:50 AM
  #7  
blaze-619's Avatar
Newbie
iTrader: (3)
 
Joined: Nov 2010
Posts: 59
Likes: 0
From: chula vista
Those #'s seem low to me too.+1 on what's the boost set at
Old Mar 6, 2011 | 11:58 AM
  #8  
lockadam2112's Avatar
Thread Starter
Evolving Member
iTrader: (8)
 
Joined: Aug 2007
Posts: 217
Likes: 0
From: colorado
my boost is 21 and my AFR is at 11.5 to 11.8
Old Mar 6, 2011 | 07:21 PM
  #9  
the mark w's Avatar
Newbie
iTrader: (1)
 
Joined: Dec 2010
Posts: 32
Likes: 0
From: virginia beach
i have similar mods with exception of the ic pipes.

i made 238hp and 211tq yesterday on stock boost and tons of fuel.

so even though you didnt make what you should, it gives me insight to what i could make once i get boost into it.

i wanted a baseline and i made a little less then what i expected.

my buddy on a buttdyno tune made over 300 on the same dyno with the same mods as you.

so def get some tuning done and more boost you can make 3 easy
Old Mar 6, 2011 | 08:08 PM
  #10  
aalleyboy's Avatar
Newbie
 
Joined: Sep 2010
Posts: 3
Likes: 0
From: new york
Originally Posted by lockadam2112
well I went to the dyno for the first time and I put on 266hp/272tq on a mustang dyno my mods are....

Intake
3' TBE
Injen hardpipe kit
Stock evo 8 turbo
Hks 272 cams
Big al tune
Spoonlin up COP non CDI
i been on the dyno this weekend i have a 8 with stock turbo only 880 injectors an aem ecu an made 350 on pump gas
Old Mar 6, 2011 | 08:39 PM
  #11  
EBEVOIX's Avatar
Newbie
iTrader: (5)
 
Joined: Jul 2008
Posts: 95
Likes: 0
From: Area 1 - Aviano, Italy
Back from Korea already, eh?! Take your car to Jorge and he'll set you up with a tune. Whose dyno did you use? Let's see that dyno chart.
Old Mar 6, 2011 | 10:03 PM
  #12  
stockredevo's Avatar
Newbie
iTrader: (3)
 
Joined: Jan 2007
Posts: 37
Likes: 0
From: St.louis
Originally Posted by aalleyboy
i been on the dyno this weekend i have a 8 with stock turbo only 880 injectors an aem ecu an made 350 on pump gas
mustang dyno or dynojet?
Old Mar 7, 2011 | 05:54 PM
  #13  
MR Turco's Avatar
EvoM Staff Alumni
iTrader: (16)
 
Joined: May 2007
Posts: 3,233
Likes: 3
From: Massachusetts
dyno chart is required for this section. PM me to restore the thread when you have one available.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
r0xah
Evo Dyno Tuning / Results
8
Apr 21, 2011 07:30 AM
Kee1pride
GSC Motorsports - Charleston, SC
8
Apr 6, 2009 06:20 AM
vaflyboi757
Evo Engine / Turbo / Drivetrain
2
Jul 10, 2008 09:50 AM
PorkRoll
EvoM New Member / FAQs / EvoM Rules
10
Oct 27, 2007 06:24 PM
Johnny Boy
Southeast Region
18
Aug 25, 2006 11:27 PM




All times are GMT -7. The time now is 01:22 PM.