Notices
Evo Dyno Tuning / Results Discuss vendor and member dyno tuning techniques, results and graphs.

2.3l pte5857 e85

Thread Tools
 
Search this Thread
 
Old Feb 14, 2012, 09:38 PM
  #31  
Evolved Member
iTrader: (24)
 
localtoys73's Avatar
 
Join Date: Oct 2008
Location: deltona
Posts: 1,028
Likes: 0
Received 1 Like on 1 Post
Originally Posted by JDM EVO 6
These 5758 spool very quickly as quick as an fp red but with much more top end congrats.
this does not spool as quick as an fp red.
Old Feb 14, 2012, 09:44 PM
  #32  
Evolved Member
Thread Starter
iTrader: (21)
 
Drill_Sergeant's Avatar
 
Join Date: Feb 2005
Location: Fort Worth, TX
Posts: 554
Likes: 0
Received 3 Likes on 2 Posts
Originally Posted by localtoys73
this does not spool as quick as an fp red.
I can't agree or disagree as I have not seen data.

I hear the term full spool a lot but that doesn't tell me if it's 20 or 40 psi.

It does spool a little faster on the street though.
Old Feb 14, 2012, 09:48 PM
  #33  
Evolved Member
iTrader: (24)
 
localtoys73's Avatar
 
Join Date: Oct 2008
Location: deltona
Posts: 1,028
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Drill_Sergeant
I can't agree or disagree as I have not seen data.

I hear the term full spool a lot but that doesn't tell me if it's 20 or 40 psi.

It does spool a little faster on the street though.
I have had the set up is why I commented, I am sure the car is a blast to drive and I have no disrespect towards your set up. I just dont want people to get the idea that this will spool the same as a fp red on your current setup thats all.

Is there a reason you did not go with a stock frame turbo? That new 6266 would be crazy on your current set up.

Last edited by localtoys73; Feb 14, 2012 at 09:50 PM.
Old Feb 14, 2012, 09:49 PM
  #34  
Evolved Member
iTrader: (24)
 
localtoys73's Avatar
 
Join Date: Oct 2008
Location: deltona
Posts: 1,028
Likes: 0
Received 1 Like on 1 Post
It seems to me atleast on my setup that I pull a few more psi on the street then the dyno not sure what that is, and spool feels a little better on the street.

If you ever in florida(orlando area) look me up I would like to go for a ride.
Old Feb 14, 2012, 09:54 PM
  #35  
Evolving Member
iTrader: (9)
 
Bramage_Dained's Avatar
 
Join Date: Apr 2009
Location: KY/MN/Afghanistan
Posts: 370
Likes: 0
Received 0 Likes on 0 Posts
Thought I'd add since I dunno how long you've been at Campbell.

I always had good luck with the E85 from the Wyatt Johnson on Wilma Rudolph, that's where most of the guys around there seem to buy it from. If you just walk into their showroom and ask you can get their fuel card(for free) which saves 5cents a gallon for the time it takes you to swipe the card at the pump.

The Maxx Fuel down 41 in Hoptown has it too, and their pumps are labled as Minimum 85% instead of the usual Minimum 70%.
Old Feb 14, 2012, 10:06 PM
  #36  
Evolved Member
Thread Starter
iTrader: (21)
 
Drill_Sergeant's Avatar
 
Join Date: Feb 2005
Location: Fort Worth, TX
Posts: 554
Likes: 0
Received 3 Likes on 2 Posts
Originally Posted by localtoys73
I have had the set up is why I commented, I am sure the car is a blast to drive and I have no disrespect towards your set up. I just dont want people to get the idea that this will spool the same as a fp red on your current setup thats all.

Is there a reason you did not go with a stock frame turbo? That new 6266 would be crazy on your current set up.
Do you have any logs from the Red? Not discrediting you, I just like to see.

I've been on a T3 setup since the beginning of 2009. Didnt feel a need to get rid of it. Plus I like having choices. Haha.

You mentioned 6266. For the next go around, it's a toss up between that and the HTA86. But I'm leaning more towards the HTA86.

I highly doubt I will be in Orlando with the Evo. But if ever we cross paths I'll take you for a ride. I was down there in December though picking up another car.
Old Feb 14, 2012, 10:07 PM
  #37  
Evolved Member
Thread Starter
iTrader: (21)
 
Drill_Sergeant's Avatar
 
Join Date: Feb 2005
Location: Fort Worth, TX
Posts: 554
Likes: 0
Received 3 Likes on 2 Posts
Originally Posted by Bramage_Dained
Thought I'd add since I dunno how long you've been at Campbell.

I always had good luck with the E85 from the Wyatt Johnson on Wilma Rudolph, that's where most of the guys around there seem to buy it from. If you just walk into their showroom and ask you can get their fuel card(for free) which saves 5cents a gallon for the time it takes you to swipe the card at the pump.

The Maxx Fuel down 41 in Hoptown has it too, and their pumps are labled as Minimum 85% instead of the usual Minimum 70%.
Thanks for the info. I think I've barely been here for a month now.

Maxx Fuel, is that right off the freeway on exit 86?
Old Feb 15, 2012, 01:57 AM
  #38  
Evolving Member
iTrader: (9)
 
Bramage_Dained's Avatar
 
Join Date: Apr 2009
Location: KY/MN/Afghanistan
Posts: 370
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Drill_Sergeant
Thanks for the info. I think I've barely been here for a month now.

Maxx Fuel, is that right off the freeway on exit 86?
Maybe there is one there too, but, it's not either of the stations right off the exit.

This one is at 2103 Ft. Campbell BLVD, in Hokinsville. I looked it up again, I guess it's Max Fuel and not Maxx Fuel.
Old Feb 15, 2012, 05:05 AM
  #39  
Evolved Member
Thread Starter
iTrader: (21)
 
Drill_Sergeant's Avatar
 
Join Date: Feb 2005
Location: Fort Worth, TX
Posts: 554
Likes: 0
Received 3 Likes on 2 Posts
Originally Posted by Bramage_Dained
Maybe there is one there too, but, it's not either of the stations right off the exit.

This one is at 2103 Ft. Campbell BLVD, in Hokinsville. I looked it up again, I guess it's Max Fuel and not Maxx Fuel.
I just mapped that address, that's too far for me. I'll stick with Wilma Rudolph. That's good info though thanks.
Old Feb 15, 2012, 09:49 AM
  #40  
Newbie
 
Turbotalon1g's Avatar
 
Join Date: Jan 2006
Location: Blaine, MN
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Drill_Sergeant
Do you have any logs from the Red? Not discrediting you, I just like to see.

I've been on a T3 setup since the beginning of 2009. Didnt feel a need to get rid of it. Plus I like having choices. Haha.

You mentioned 6266. For the next go around, it's a toss up between that and the HTA86. But I'm leaning more towards the HTA86.

I highly doubt I will be in Orlando with the Evo. But if ever we cross paths I'll take you for a ride. I was down there in December though picking up another car.
Please make another thread comparing this turbo and the next one you get, would love to see the diff between this and the 6266.

What compression ratio pistons do you have?
Old Feb 15, 2012, 10:10 AM
  #41  
Evolved Member
Thread Starter
iTrader: (21)
 
Drill_Sergeant's Avatar
 
Join Date: Feb 2005
Location: Fort Worth, TX
Posts: 554
Likes: 0
Received 3 Likes on 2 Posts
Originally Posted by Turbotalon1g
Please make another thread comparing this turbo and the next one you get, would love to see the diff between this and the 6266.

What compression ratio pistons do you have?
Definitely will do a comparison with the next turbo. I know both HTA86 and 6266 are capable of doing big things, if I could get some hard data on which spools quicker it'd help a lot. But from what I've seen the 86 spools quicker than 6262. And I hear the 6266 spools faster than 6262 by a couple hundred rpms.

Choices...
Old Feb 15, 2012, 10:11 AM
  #42  
Evolved Member
Thread Starter
iTrader: (21)
 
Drill_Sergeant's Avatar
 
Join Date: Feb 2005
Location: Fort Worth, TX
Posts: 554
Likes: 0
Received 3 Likes on 2 Posts
9:1 CR btw
Old Feb 15, 2012, 01:41 PM
  #43  
Evolved Member
iTrader: (45)
 
Redline06's Avatar
 
Join Date: Aug 2006
Location: Fort Bragg, NC
Posts: 851
Likes: 0
Received 0 Likes on 0 Posts
Yeah drill, I was talking to you.. Am here on Campbell.. I got about a month left..lol
Old Feb 15, 2012, 01:47 PM
  #44  
Evolved Member
Thread Starter
iTrader: (21)
 
Drill_Sergeant's Avatar
 
Join Date: Feb 2005
Location: Fort Worth, TX
Posts: 554
Likes: 0
Received 3 Likes on 2 Posts
Originally Posted by Redline06
Yeah drill, I was talking to you.. Am here on Campbell.. I got about a month left..lol
Well I don't take kindly to people telling what I need to do with my time or my car, so no I do not "need" to take you for a ride.

Brained, did you PCS?
Old Feb 15, 2012, 02:28 PM
  #45  
Evolving Member
iTrader: (3)
 
forc3 f3d's Avatar
 
Join Date: Oct 2009
Location: Germany
Posts: 230
Likes: 0
Received 1 Like on 1 Post
looks like a really nice set up you have there! i need to PCS somewhere with e85


Quick Reply: 2.3l pte5857 e85



All times are GMT -7. The time now is 02:57 PM.