Notices
Evo Dyno Tuning / Results Discuss vendor and member dyno tuning techniques, results and graphs.

BBK Full Evo9

Thread Tools
 
Search this Thread
 
Old May 30, 2012 | 09:49 PM
  #1  
boostfeddevo9's Avatar
Thread Starter
Newbie
10 Year Member
iTrader: (3)
 
Joined: Nov 2010
Posts: 52
Likes: 0
From: Hanover, Pa
BBK Full Evo9

So I finally got my car up to CBRD to see what it would make on the heartbreaker and it was a pretty hot day out but to say the least Chad got me into there busy schedule so I appreciate that and ended up putting down 368hp 329tq at 27.8psi this car was street tuned by boosted91t. I ran the car the next day at 7580 in Maryland and pulled a 11.79 @ 117 so I was pretty content with that. But there defintely is more power to be made with a retune

Mod list:
BBK Full (ported)
Precision 880cc injectors
ETS 3.5" Garrett Core
ETS ic pipes
Kelford 272's
Map beehives
ARP studs
Perrin Intake
Hallman Manual BC
3" TBE
Megan o2 housing
Synapse Dv
93 Octane, Everything else is stock
BBK Full Evo9-img_0456.jpg
Reply
Old May 31, 2012 | 06:50 AM
  #2  
CBRD's Avatar
Account Disabled
iTrader: (60)
 
Joined: Dec 2004
Posts: 7,363
Likes: 8
From: york, pa 17402
thanks for bringing it in!!

The heat definetly wasnt helping- a few little things coule make a slightly difference-

otherwise- grant did a great job on the tune!

cb
Reply
Old May 31, 2012 | 08:24 AM
  #3  
domyz's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jun 2010
Posts: 878
Likes: 7
From: Canada
Nice setup. Must pull very hard, very nice 1/4 times..
CBRD turbo spools so quickly. I'm leaning towards these ones for that reason.
With a non ported Full, 3 port and stock cams it would spool even sooner.
Reply
Old May 31, 2012 | 08:50 AM
  #4  
wazzelby's Avatar
Evolving Member
iTrader: (11)
 
Joined: Jul 2007
Posts: 342
Likes: 2
From: Colorado
Nice numbers and times!!
I'm putting in my BBK Ported Full this weekend. Running E85 on stock cams with all the bolt ons. I'm hoping for about 450. Currently on the stock IX turbo (E85) I'm at 382 with 27 PSI. Plus I'm a mile above sea level
I do have a 3 port installed but not tuned, I'm still on the MBC. I might try and tune the 3port as well with Tephra 7.
Reply
Old May 31, 2012 | 09:00 AM
  #5  
R/TErnie's Avatar
Evolved Member
iTrader: (32)
 
Joined: Aug 2003
Posts: 5,380
Likes: 6
From: WAR EAGLE!
Good numbers on pump
Reply
Old May 31, 2012 | 11:09 AM
  #6  
boostfeddevo9's Avatar
Thread Starter
Newbie
10 Year Member
iTrader: (3)
 
Joined: Nov 2010
Posts: 52
Likes: 0
From: Hanover, Pa
Originally Posted by CBRD
thanks for bringing it in!!

The heat definetly wasnt helping- a few little things coule make a slightly difference-

otherwise- grant did a great job on the tune!

cb
No problem, I'll be up again sometime!! It def was a hot day out but im glad to see what it actually puts down thank's again chad!
Reply
Old May 31, 2012 | 11:13 AM
  #7  
boostfeddevo9's Avatar
Thread Starter
Newbie
10 Year Member
iTrader: (3)
 
Joined: Nov 2010
Posts: 52
Likes: 0
From: Hanover, Pa
Originally Posted by domyz
Nice setup. Must pull very hard, very nice 1/4 times..
CBRD turbo spools so quickly. I'm leaning towards these ones for that reason.
With a non ported Full, 3 port and stock cams it would spool even sooner.
Yeah the car is a blast to drive pull's great and did well at the drag strip!
You can't go wrong with the bbk full it's a great stock frame turbo
Reply
Old May 31, 2012 | 11:16 AM
  #8  
boostfeddevo9's Avatar
Thread Starter
Newbie
10 Year Member
iTrader: (3)
 
Joined: Nov 2010
Posts: 52
Likes: 0
From: Hanover, Pa
Originally Posted by wazzelby
Nice numbers and times!!
I'm putting in my BBK Ported Full this weekend. Running E85 on stock cams with all the bolt ons. I'm hoping for about 450. Currently on the stock IX turbo (E85) I'm at 382 with 27 PSI. Plus I'm a mile above sea level
I do have a 3 port installed but not tuned, I'm still on the MBC. I might try and tune the 3port as well with Tephra 7.
Thanks man good luck you'll love the bbk full without a doubt!!


R/T Ernie- It definitely get's the job done
Reply
Old May 31, 2012 | 01:15 PM
  #9  
boosted91t's Avatar
Evolved Member
iTrader: (65)
 
Joined: Oct 2007
Posts: 723
Likes: 1
From: New Oxford, Pa
Nice results. I would really like to see a 3 port on this car
Reply
Old May 31, 2012 | 01:52 PM
  #10  
CBRD's Avatar
Account Disabled
iTrader: (60)
 
Joined: Dec 2004
Posts: 7,363
Likes: 8
From: york, pa 17402
Originally Posted by boosted91t
Nice results. I would really like to see a 3 port on this car
3 port and Garrett core fmic-

and 25 more whp with retune-

cb
Reply
Old May 31, 2012 | 02:14 PM
  #11  
boosted91t's Avatar
Evolved Member
iTrader: (65)
 
Joined: Oct 2007
Posts: 723
Likes: 1
From: New Oxford, Pa
Yea I noticed the ic had the "other" core
Reply
Old May 31, 2012 | 02:28 PM
  #12  
AreSTG's Avatar
Evolved Member
iTrader: (4)
 
Joined: Jul 2005
Posts: 951
Likes: 1
From: PA/NC
i'm confused, doesn't the OP say Garrett 3.5" from ETS?
Reply
Old May 31, 2012 | 06:19 PM
  #13  
boosted91t's Avatar
Evolved Member
iTrader: (65)
 
Joined: Oct 2007
Posts: 723
Likes: 1
From: New Oxford, Pa
^ its a 3.5" ETS with their core. I installed it
Reply
Old Jun 2, 2012 | 01:55 AM
  #14  
AreSTG's Avatar
Evolved Member
iTrader: (4)
 
Joined: Jul 2005
Posts: 951
Likes: 1
From: PA/NC
Originally Posted by boosted91t
^ its a 3.5" ETS with their core. I installed it
ok, gotcha.

where the hell is New Oxford? I'm from Oxford (i guess it's Old Oxford now). Is New Oxford the town west of York going to Gettysburg, that has a roundabout or two in it?
Reply
Old Jun 2, 2012 | 09:16 PM
  #15  
boosted91t's Avatar
Evolved Member
iTrader: (65)
 
Joined: Oct 2007
Posts: 723
Likes: 1
From: New Oxford, Pa
You got it, right before gettysburg
Reply



All times are GMT -7. The time now is 06:20 AM.