My First EvoScan Log MR9
#1
Newbie
Thread Starter
My First EvoScan Log MR9
So today i decided to plug in my tactrix cable and give my evoscan software a whirl. I am a complete noob when it comes to tuning and I was wondering if I did the pulls correctly. Also if my numbers are decent considering my mods
Seems like my best pull was 255hp/219tq.
Mods are:
Injen Turboback exaust with cat delete and downpipe
Godspeed o2 housing and headers
Licp and CAI
Synapse DV
The car has not been tuned except for the overboost delete with ECUFlash
Also wondering in the drop box why it comes up as evo 10 mr and evo9 mr is not an option?
Seems like my best pull was 255hp/219tq.
Mods are:
Injen Turboback exaust with cat delete and downpipe
Godspeed o2 housing and headers
Licp and CAI
Synapse DV
The car has not been tuned except for the overboost delete with ECUFlash
Also wondering in the drop box why it comes up as evo 10 mr and evo9 mr is not an option?
#3
Newbie
iTrader: (1)
I usually use the virtual dyno excel program on the forums here to plot my HP and tq curves. It's easier. Just log with evoscan and open the log in and excel spread sheet and copy/past log time and rpm. Check it out I think you will like it. Plus you can keep baseline curves and make adjustments and see the results on a second set of curves.
#4
Evolved Member
iTrader: (65)
Join Date: Oct 2007
Location: New Oxford, Pa
Posts: 723
Likes: 0
Received 0 Likes
on
0 Posts
X2 with using VD. Just do a 3rd gear pull on the most flat road you can. Great learning and tuning tool. Also the less information you log, the more accurate the data is that are logging
Thread
Thread Starter
Forum
Replies
Last Post
MREVO9NOOB
EvoM New Member / FAQs / EvoM Rules
20
May 27, 2012 05:32 PM
allconfused
General Engine Management / Tuning Forum
6
Jul 11, 2010 04:10 PM