Submitted review on different thread but here is the sum of it.

Bolt-ons
Walbro 255
3-port
91 octane tuned by Tuning technologies.

 

nice
what are your bolt-ons?

 

turboxs DP, UR HFC, Perring intake, ETS LP2 LICP, AMS CBE, 3-port and walbro. pretty basic.

 

Pretty good hp gain with basic bolt ons.

 

Nice man
I have an 03 as well with the same bolt on other than an o2 dump.
Ill be going to Alfred as well for a tune this weekend

 

cool. be sure to post up your results. i want to see the difference the 02 dump does. alfred is the man!

 

Don't take any of my questions the wrong way.....

Do you know what the uncorrected numbers were?
Curious to know if the HFC is causing you to only hit 22psi by 3.5k, or was that built into the tune?

Nice broad powerband either way. Nice to see some other 9.8 mildly modded numbers coming out.

 

i told the tuner to do what he could with what i have on the car. my gauge reads 25 all the way to redline. either way the car wants to pull and pull. i love it!

 

I wouldn't trust your boost gauge too much. With the mods you have the turbo just wouldn't be able to hold 25 at redline. The chart above also shows that its closer to low 20s at redline. Good powerband none the less.

 

I have a uicp, cat back exhaust, forge bov, and walboro 255 tuned by Buschur to 26 psi on 93oct and made 300 on their mustang dyno, which is approximately 339 on a dynojet. Nice numbers!

Edit: yeah I peak at 27psi and I see around 23-25 at most at redline

 

VIII or IX turbo?

 

Good numbers. Keep it up man.