Thought I would share some numbers as I am very pleased with the results.
Thanks to TSComptuned for all the work put into the tune!

I am probably one out of a handful (I am guessing?) people in Sweden running SD and Tephra.


A Little info about fuel and ecu:

ECU: Stock ECU + tephra v7 / sd / 4bar / ecuboost
Fuel: 85% ethanol

Mods:
Invidia Elbow
Megan Racing Downpipe modified
AKR Performance Exhaust
Powerfow muffler
Wallbro pump
HKS M40IL plugs re-gapped
K&N Filter with 3" intake

All Pulls in 3rd gear:

 

Very nice numbers man!! Congrats!!! Tom is a genius behind that computer.

 

3-port much needed!

 

Looks like the car has ECU controlled boost = 3port.

the turbo falls of because its a stocker .. there is for sure torque left on the table though but Im sure Tom has his reasons.

-Gary

 

25 pulls later and 15 rom edits. car is making good power and should be very safe for what its being used for.


It has one. As Gary mentioned, its the turbo not able to hold the boost. I am not pushing it severely either.

Hey Gary,

I kept the torque down on this because its being used in road course events and long endurance competition events. My goal was to keep it over 300tq throughout the entire powerband and make sure HP kept holding until he lifted.

That said, the torque is still not bad for only 24psi.

I tune a lot of cars from Sweden, and i keep them all on the safe side. I have around 4 or 5 now that win their events and place 1st.

 

Thanks for sharing, and thank you for the kind words Mark! I have 4-5 in Sweden on speed density now i think. You guys really like road courses i noticed.

 

Impressive numbers!!!