EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo Dyno Tuning / Results Discuss vendor and member dyno tuning techniques, results and graphs.

My 2.2 4G63/ 6466 Build

Thread Tools
 
Search this Thread
 
Old Jun 25, 2014 | 02:57 PM
Share
  #16  
RussellDaniel's Avatar
RussellDaniel
Thread Starter
Evolved Member
iTrader: (9)
 
Joined: Oct 2012
Posts: 554
Likes: 2
From: hinesville
Originally Posted by 420a-t
Nice setup and numbers. I have the same 2.2l I'm building right now. I was told it's good up to around 9400rpm. Heard anything on safe rev limit?

I have heard its good to 9500 RPMS although i personally will be shifting around 9100, a 3600 RPM powerband is a pretty wide powerband anyway.
Reply
0
Old Jun 25, 2014 | 03:44 PM
Share
  #17  
mitsubeastlee's Avatar
mitsubeastlee
Evolved Member
iTrader: (3)
 
Joined: Oct 2012
Posts: 947
Likes: 2
From: San Jose, Ca
very nice! sub 3000lbs and 750whp and plenty of rev sounds like a stout 9 second car if it can hold together!
Reply
0
Old Jun 25, 2014 | 05:18 PM
Share
  #18  
RussellDaniel's Avatar
RussellDaniel
Thread Starter
Evolved Member
iTrader: (9)
 
Joined: Oct 2012
Posts: 554
Likes: 2
From: hinesville
Originally Posted by mitsubeastlee
very nice! sub 3000lbs and 750whp and plenty of rev sounds like a stout 9 second car if it can hold together!


Thank you Sir, im very happy with the results! Fingers crossed it stays together for a while atleast, lol.
Reply
0
Old Jun 25, 2014 | 06:30 PM
Share
  #19  
Faisalm's Avatar
Faisalm
Evolved Member
 
Joined: Apr 2011
Posts: 851
Likes: 2
From: US
I like this setup. Well done on the choices you made.
Reply
0
Old Jun 25, 2014 | 07:51 PM
Share
  #20  
RussellDaniel's Avatar
RussellDaniel
Thread Starter
Evolved Member
iTrader: (9)
 
Joined: Oct 2012
Posts: 554
Likes: 2
From: hinesville
Originally Posted by Faisalm
I like this setup. Well done on the choices you made.
Yeah for me it was a no brainer, the 2.2 is the best of both worlds.
Reply
0
Old Jun 27, 2014 | 12:21 PM
Share
  #21  
RussellDaniel's Avatar
RussellDaniel
Thread Starter
Evolved Member
iTrader: (9)
 
Joined: Oct 2012
Posts: 554
Likes: 2
From: hinesville
Future Mods Built Transmission, Built Transfer Case, 4 inch intercooler, and a fully ported Head.
Reply
0
Old Jun 27, 2014 | 02:20 PM
Share
  #22  
Yoklus's Avatar
Yoklus
Newbie
 
Joined: Feb 2010
Posts: 7
Likes: 0
From: Dallas
wow, so your running this with a stock tranny?
Reply
0
Old Jun 27, 2014 | 02:48 PM
Share
  #23  
420a-t's Avatar
420a-t
Evolved Member
iTrader: (15)
 
Joined: Sep 2009
Posts: 735
Likes: 1
From: Idaho Falls, ID
Most "built" trannys are just rebuilds fyi. Sometimes different stock gears, sometimes new output shafts, but mostly I've seen rebuilds with stock stuff.
Reply
0
Old Jun 27, 2014 | 03:20 PM
Share
  #24  
Yoklus's Avatar
Yoklus
Newbie
 
Joined: Feb 2010
Posts: 7
Likes: 0
From: Dallas
Originally Posted by RussellDaniel
Future Mods Built Transmission, Built Transfer Case, 4 inch intercooler, and a fully ported Head.
built tranny as in what?
Reply
0
Old Jun 27, 2014 | 04:13 PM
Share
  #25  
RussellDaniel's Avatar
RussellDaniel
Thread Starter
Evolved Member
iTrader: (9)
 
Joined: Oct 2012
Posts: 554
Likes: 2
From: hinesville
[QUOTE=Yoklus;11243869]built tranny as in what?

Rebuilt Transmission possibly change the final drive, "built" just a unbrella term.
Reply
0
Old Jun 28, 2014 | 06:39 PM
Share
  #26  
Evoloved's Avatar
Evoloved
Evolving Member
 
Joined: Jul 2011
Posts: 117
Likes: 0
From: Atlanta,Ga
How far is your build shop from Atlanta?
Reply
0
Old Jun 30, 2014 | 02:15 PM
Share
  #27  
RussellDaniel's Avatar
RussellDaniel
Thread Starter
Evolved Member
iTrader: (9)
 
Joined: Oct 2012
Posts: 554
Likes: 2
From: hinesville
Originally Posted by Evoloved
How far is your build shop from Atlanta?

4-5 hours maybe.
Reply
0
Old Jul 1, 2014 | 11:08 AM
Share
  #28  
JohnBradley's Avatar
JohnBradley
Evolved Member
Shutterbug
Liked
Loved
Community Favorite
iTrader: (30)
 
Joined: Jan 2004
Posts: 11,406
Likes: 78
From: Northwest
The only built trans is a dog box, everything else is still stock. So this is a 153mm rod motor?
Reply
0
Old Jul 1, 2014 | 11:48 AM
Share
  #29  
RussellDaniel's Avatar
RussellDaniel
Thread Starter
Evolved Member
iTrader: (9)
 
Joined: Oct 2012
Posts: 554
Likes: 2
From: hinesville
Originally Posted by JohnBradley
The only built trans is a dog box, everything else is still stock. So this is a 153mm rod motor?


Aaron this is 156mm rods with CP 2.2 pistons.
Last edited by RussellDaniel; Jul 1, 2014 at 12:59 PM.
Reply
0
Old Jul 1, 2014 | 10:21 PM
Share
  #30  
EvilTechnology's Avatar
EvilTechnology
Evolved Member
15 Year Member
Photogenic
Photoriffic
iTrader: (64)
 
Joined: Jul 2006
Posts: 745
Likes: 1
From: WA Seattle toolanddyedesigns.com
Originally Posted by RussellDaniel
Aaron this is 156mm rods with CP 2.2 pistons.
Same as mine, dimensionally. CP's with 9.3:1 CR, 94mm Eagle crank, 156mm Oliver rods. Nice build!
Reply
0



Advanced Search

All times are GMT -7. The time now is 08:02 PM.