So Im stationed in Germany and I had recently bought a JVC double din unit along with all the stuff needed to relocate the HVAC. The only thing I need now though is a wiring harness that I can solder into the JVC stereo harness to connect up to the factory radios pin. Does anyone know a good site I can get a harness connector from to do the job?

 

I don't know if crutchfield is international, but the wiring harness they gave me was perfect. It even matched my alpine wire color & striping for easy soldering.

 

Nice I was looking at them. They seem very customer oriented, but I wasnt really sure if the harness they had was made for the evo considering it fitted multiple vehicles like the mirage and stuff.

 

Also. Crutchfield doesn't sell them, but get a PAC TR-7 universal trigger output while you have the wiring harness out. I gave about $22 for mine and it was progammed vehicle specific to bypass parking brake and footbrake wiring. Not only do you not have to run all that extra wiring, but you can watch DVD's on the fly. Not suggested anywhere but I couldn't use logworks or evo tune to display gauges through my headunit while driving. Problem solved.

 

Ebay. It's less than $10 shipped in the US. Probably a little more shipped to Europe.

 

I also bought an overseas ISO harness(http://cgi.ebay.com/Mitsubishi-ISO-W...item3a540981ee) for use with an XTRONs radio from ebay and the CONSTANT 12V(YELLOW) doesn't seem to be working since it doesn't seem to remember all and only some of the settings. Im wondering if its different for the USDM vs EDM.

Does anyone have a picture of the US MALE harness PIN OUTS which plug into the OEM FEMALE with COLOR references?

 

This link has a pretty good listing of the wiring info. https://www.evolutionm.net/forums/ev...n-problem.html