im thinking of getting KENWOOD KDC-X995 for my evo ix but i couldnt figure out if it will fit properly or it will be too small. does anyone have it or know how it fits



many thanks
mike

 

The USDM Evo has a single-DIN radio slot. The deck is a single-DIN model. It's standardized. It will fit as well as any other single-DIN deck. Your profile points to a JDM IX. If that's what you have, it may come with a double-DIN opening, in which case the deck wouldn't just drop in.

Edit: I just took a quick look at your posts and you seem to be in the US, so what's the deal with JDM?

 

i think i wasn't very clear in my question i meant that it will fit in without leaving any empty space on the sides ( i had a jvc before and a few cm on each side were uncovered)


im in Boston but my car is back home in lebanon

 

I see what you mean. It's almost certain there will still be room left on the sides if you don't install the supplied trim plate. It likely won't fit easily. You'll need to remove the HU's faceplate to install, and possibly trim/cut some of the mounting tabs on the trim plate to fit. The cleanest install is in the lower cubby.


Fair enough. Good luck.