GM Synchromesh Question
#16
Newbie
Join Date: Dec 2004
Location: all american city....niles,il
Posts: 93
Likes: 0
Received 1 Like
on
1 Post
just to let everyone know that diaqueen factory fill stuff is synthetic based gl-4 gear lube and cost about 90 bucks for 5 liter can from the dealer, but i used bg syncromesh as a cheaper synthetic based alternative that is gl-4 spec. never use gl5 as this has additives that will corrode the brass synchronizers...
#18
Originally Posted by EVOTEXAS
I visited 2 auto parts stores and they both had 1 Pennzoil. If only there were another one I could have used it. Oh well, the Chevy dealer had more than either of us could carry.
#25
Evolving Member
iTrader: (2)
Join Date: Apr 2003
Location: Texas
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Aluma
yeah, I got LUCKY...my autozone had 3 left.
bryan
#27
EvoM Staff Alumni
iTrader: (66)
Don't forget that you can get the GM Syncroshift (same as Pennzoil Syncromesh) at most your Mitsubishi dealers. It was a dealer/manufacturer "fix" for DSM "notchy shifting" trannies. Granted, there is less and less as DSMs have been out of circulation for a while, but one of my dealers still stocked it.
However, check AutoZone first as the Pennzoil Syncromesh is half the price...
However, check AutoZone first as the Pennzoil Syncromesh is half the price...
#28
syncromesh blew my tranny...had a slight grind into 3rd...put in syncromesh, and it went away....i babied the **** outta the tranny and 3k miles later, the car started poppin outta second gear when id release the clutch....syncromesh doesnt fix anything, it covers up problems and doesnt sufficiently protect the gears/syncros...
#29
Newbie
iTrader: (14)
Join Date: Nov 2004
Location: OKC
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
If you had problems to begin with, then you had problems. It might "mask" some problems, but imho a problem is going to get worse with or without it.
I HIGHLY doubt it actually made it worse.
Rob D.
I HIGHLY doubt it actually made it worse.
Rob D.
#30
Evolved Member
iTrader: (12)
Originally Posted by rEVOLUTIONh8
syncromesh blew my tranny...had a slight grind into 3rd...put in syncromesh, and it went away....i babied the **** outta the tranny and 3k miles later, the car started poppin outta second gear when id release the clutch....syncromesh doesnt fix anything, it covers up problems and doesnt sufficiently protect the gears/syncros...