BR500 Turbo Upgrade
Thread Starter
Evolved Member
iTrader: (6)
Joined: Jun 2004
Posts: 729
Likes: 2
From: Arlington Heights IL
BR500 Turbo Upgrade
Alright guys who has it? When are you seeing full boost by? Have you been dynoed, if so what mods? Finally are you happy with it? I am considering this upgrade because I like the price and can't afford something big (ie stroker motor and gt35r upgrade). I really want to order this kit with alcohol injection and have Al do a custom tune on it when he comes out. Thanks for the help!
Here is a thread that might have some good info. https://www.evolutionm.net/forums/sh...=4ringturncoat
In 4ringturncoat's sig is that vid that I have. Hope this helps.
In 4ringturncoat's sig is that vid that I have. Hope this helps.
Guys - the new hot set up is the BR turbo with GT3076 ball bearing set up and extrenal wastegate on cast manifold
I just finished a stage 4 car which is going to be covered in a major magazine
It hit 442 whp on pump gas
I just finished a stage 4 car which is going to be covered in a major magazine
It hit 442 whp on pump gas
Trending Topics
Originally Posted by DynoFlash
Guys - the new hot set up is the BR turbo with GT3076 ball bearing set up and extrenal wastegate on cast manifold
I just finished a stage 4 car which is going to be covered in a major magazine
It hit 442 whp on pump gas
I just finished a stage 4 car which is going to be covered in a major magazine
It hit 442 whp on pump gas
Originally Posted by DynoFlash
Guys - the new hot set up is the BR turbo with GT3076 ball bearing set up and extrenal wastegate on cast manifold
I just finished a stage 4 car which is going to be covered in a major magazine
It hit 442 whp on pump gas
I just finished a stage 4 car which is going to be covered in a major magazine
It hit 442 whp on pump gas
Is that the same cast manifold that Buschur has been selling for a while, or do you need a different manifold for the external wastegate?
Thread Starter
Evolved Member
iTrader: (6)
Joined: Jun 2004
Posts: 729
Likes: 2
From: Arlington Heights IL
Originally Posted by DynoFlash
Guys - the new hot set up is the BR turbo with GT3076 ball bearing set up and extrenal wastegate on cast manifold
I just finished a stage 4 car which is going to be covered in a major magazine
It hit 442 whp on pump gas
I just finished a stage 4 car which is going to be covered in a major magazine
It hit 442 whp on pump gas
Originally Posted by DynoFlash
Guys - the new hot set up is the BR turbo with GT3076 ball bearing set up and extrenal wastegate on cast manifold
I just finished a stage 4 car which is going to be covered in a major magazine
It hit 442 whp on pump gas
I just finished a stage 4 car which is going to be covered in a major magazine
It hit 442 whp on pump gas
What will that set-up run us {$}?
I have the BR500BB kit and it is really nice. We are still getting the tuning worked out, but it pulls hard. The car is fast and it is still really rich, we have a long way to go to reach full potential. I need Al to tune my car. I am too far away from David Buschur.
For whats its worth a got one run in last weekend and with a 2.1 60' time I ran a 12.10 @ 121mph. I spun so bad on the launch I hit the rev litmit and had to back out of it and then get back in again. Track had such a long line I gave up and headed home.