Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Borla turbo manifold

Thread Tools
 
Search this Thread
 
Old May 11, 2005 | 08:12 AM
  #1  
EvolManiac's Avatar
Thread Starter
Newbie
 
Joined: Apr 2005
Posts: 75
Likes: 0
From: Japan
Cool Borla turbo manifold

Does anyone know if they come with Anti Lag System ports? If not can someone point me to a manufacturer that makes those, that doesnt compramise the quality and for a good price.
Reply
Old May 11, 2005 | 08:21 AM
  #2  
evo 8 ya's Avatar
Evolved Member
iTrader: (31)
 
Joined: Jul 2003
Posts: 2,318
Likes: 1
From: 39.800N 76.983W
I don't think borla comes with the anit lag holes. but this manifold does

http://www.dnperformance.com/evo.html
Reply
Old May 11, 2005 | 08:22 AM
  #3  
trinydex's Avatar
Evolved Member
iTrader: (12)
 
Joined: Jan 2004
Posts: 6,072
Likes: 8
From: not here
first off if you're gonna try to use antilag on a tube mani you're gonna break something. second of all if you wanna run antilag with a tube mani that doesn't have bosses... just use egr.

egr antilag is the method of feeding oxygen back into the mani by tapping the cold side of your turbo and connecting it to your egr valve so that when the egr recircs the exhaust gases you will also get fresh air into your exhaust manifold. this will give more than enough air to get your bang bang going.
Reply
Old May 11, 2005 | 08:24 AM
  #4  
evo 8 ya's Avatar
Evolved Member
iTrader: (31)
 
Joined: Jul 2003
Posts: 2,318
Likes: 1
From: 39.800N 76.983W
Originally Posted by trinydex
first off if you're gonna try to use antilag on a tube mani you're gonna break something. second of all if you wanna run antilag with a tube mani that doesn't have bosses... just use egr.

egr antilag is the method of feeding oxygen back into the mani by tapping the cold side of your turbo and connecting it to your egr valve so that when the egr recircs the exhaust gases you will also get fresh air into your exhaust manifold. this will give more than enough air to get your bang bang going.
he's from japan. It's stock on his evo IV over there.
Reply
Old May 11, 2005 | 08:32 AM
  #5  
trinydex's Avatar
Evolved Member
iTrader: (12)
 
Joined: Jan 2004
Posts: 6,072
Likes: 8
From: not here
uhm.... what i said still holds... he can easily take off the bosses from his mani and disconnect it from the bov if he wishes to run the borla or any other mani. running egr air feed is just a matter of custom fabrications (drilling a hole, running a line) and tuning which he should be fully prepared to do anyway.
Reply
Old May 11, 2005 | 08:50 AM
  #6  
EvolManiac's Avatar
Thread Starter
Newbie
 
Joined: Apr 2005
Posts: 75
Likes: 0
From: Japan
hmm, too much work to drill hole, and not enough tools, i left them in the states, too heavy to bring... hey EVO 8 YA will the quality of the tubes from dnperformance hold up to the heat?
Reply
Old May 11, 2005 | 08:53 AM
  #7  
JDM-Spec.com's Avatar
Evolved Member
iTrader: (7)
 
Joined: Jan 2004
Posts: 572
Likes: 0
From: Southern CA
I have it on my car, it doesn't came with anti-lag ports. It is only made for the USDM evos.
Reply
Old May 11, 2005 | 08:57 AM
  #8  
EvolManiac's Avatar
Thread Starter
Newbie
 
Joined: Apr 2005
Posts: 75
Likes: 0
From: Japan
Will the Turbo Manifold from DNperformance work?
Reply
Old May 11, 2005 | 09:05 AM
  #9  
EvolManiac's Avatar
Thread Starter
Newbie
 
Joined: Apr 2005
Posts: 75
Likes: 0
From: Japan
Thanks Evo 8 YA
Reply
Old May 11, 2005 | 09:45 AM
  #10  
EvolManiac's Avatar
Thread Starter
Newbie
 
Joined: Apr 2005
Posts: 75
Likes: 0
From: Japan
I saw the Megan Racing Turbo Manifold, it comes with the ALS ports, does anyone have experience or info on the quality and gains on that?
Reply
Old May 11, 2005 | 09:50 AM
  #11  
redevo561's Avatar
Evolved Member
iTrader: (15)
 
Joined: May 2004
Posts: 594
Likes: 0
From: Florida
ive heard some good things about that manifold they have mention better spool up and top end was alot better but that all depends on supporting mods as well
Reply
Old May 11, 2005 | 10:00 AM
  #12  
EvolManiac's Avatar
Thread Starter
Newbie
 
Joined: Apr 2005
Posts: 75
Likes: 0
From: Japan
what have you heard on the quality, ive read a lot about manifolds cracking in half and so forth, does it have a warranty on it also
Reply
Old May 11, 2005 | 01:32 PM
  #13  
EvO6-RS2's Avatar
Evolved Member
iTrader: (12)
 
Joined: Sep 2003
Posts: 505
Likes: 0
From: iN dI CaRiBbEaN
I got a DNP & Megan Racing manifolds, the DNP didn't come with ALS/EGR ports for the JDM spec EVO's...but the Megan did have the ports for ALS/EGR.

Don't buy the DNP, buy the Megan if you want to stay with they stock egr/als setup. And the Megan's CHEAPER!! It looks well built as well.
Reply
Old May 11, 2005 | 01:39 PM
  #14  
djtmotorsports's Avatar
Evolving Member
iTrader: (11)
 
Joined: May 2003
Posts: 259
Likes: 0
From: Detroit, MI
Wait for the GT Spec header!! It will be on the market in the next couple of months. It will have the anti-lag ports. I have seen pre-production pieces and it is gorgeous. If you have time, wait!
Reply
Old May 11, 2005 | 11:23 PM
  #15  
EvolManiac's Avatar
Thread Starter
Newbie
 
Joined: Apr 2005
Posts: 75
Likes: 0
From: Japan
thanks
Reply




All times are GMT -7. The time now is 04:16 PM.