ok i have it completey installed and it was working great but then a friend of mine was ****ing around and accidently pulled the hose off the wastegate and i didnt notice until i boosted over 25 psi. so now everything is hooked back up and im only bossting to 11 or 12 and it wont go up....any ideas

 

Um...I would check all the settings in your AVCR because it has self learning mode. It might adjusted the duty cycle if it sense something wrong. Other than that, I would check all hoses again and check for boost leak.

Thanks,
Tom

 

we just re routed the hoses to make sure theres not a boost leak. Is there any way to reset the avcr?? I think maybe i can start from the beginning again and getting all of the settings correct without having to worry about anyone pulling off my hoses

 

You can initialize the control unit under etc.

Tom

 

So, you overboosted and now the car won't boost more than 11-12 pounds? Sounds like you blew out the diaphragm of your diverter valve. The stock DV is notoriously weak.

Emre