Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

S-AFC on EVO 8

Thread Tools
 
Search this Thread
 
Old Apr 18, 2003 | 01:16 PM
  #91  
rdrkt's Avatar
Newbie
 
Joined: Feb 2003
Posts: 76
Likes: 0
From: Reading, Pa
Re: Re: SAFC install

Originally posted by RTW EVO
the closest to PA is Pruven Performance in CT, at least that's the only one i know of in the tri-state area
I listed 3 that were closer than that please read the whole post BEFORE responding

PS The Tri State area in this context is considered PA, NJ, DE.

Last edited by rdrkt; Apr 18, 2003 at 01:21 PM.
Reply
Old Apr 18, 2003 | 01:20 PM
  #92  
rdrkt's Avatar
Newbie
 
Joined: Feb 2003
Posts: 76
Likes: 0
From: Reading, Pa
Originally posted by Eric Lyublinsky
,Do you know ware I can get that type of tail pipe senser?? Motec is a small fortune.
Eric as far as Im aware they just place the VX O2 sensor in the tail pipe. This is fine when you are using it on the dyno but if you wanted to use it on the street you would use it in your downpipe.

Last edited by rdrkt; Apr 18, 2003 at 01:23 PM.
Reply
Old Apr 18, 2003 | 02:01 PM
  #93  
YellwTyper's Avatar
Evolved Member
iTrader: (1)
 
Joined: Dec 2002
Posts: 564
Likes: 0
Where can you buy the HKS A/f-Knock Amp? To me wouldn't buying a Motec WB02 sensor be more sensible and far better quality then the rest. If u get the Motec, you can charge other people when they want to use it!(money maker)
Reply
Old Apr 23, 2003 | 11:12 PM
  #94  
RENN-ART's Avatar
Evolved Member
iTrader: (11)
 
Joined: Mar 2003
Posts: 685
Likes: 0
From: chicago
Re: Re: SAFC install

AMS has a nice one .. right here: http://www.automotosports.com/evo3_test.asp




Originally posted by hel_if_ino


can somebody answer this one, particularly someone with the safc/safc2 installed, i would like to know about the wiring, if it requires splice and dice or just a plug on top of a plug type connection... i dont want to **** with the stock wiring harness while i still have a warranty. I did the one on my '00 eclipse gt and it was a nightmare.
Reply
Old Apr 24, 2003 | 01:05 AM
  #95  
wing240's Avatar
Evolving Member
 
Joined: Mar 2003
Posts: 110
Likes: 0
From: L.A
According to HKS, besides just the A/F wideband, it also adjust Crank Angle!!!!! now that's something neat.....

Originally posted by YellwTyper
Where can you buy the HKS A/f-Knock Amp? To me wouldn't buying a Motec WB02 sensor be more sensible and far better quality then the rest. If u get the Motec, you can charge other people when they want to use it!(money maker)
Reply
Old May 29, 2003 | 09:52 PM
  #96  
Guru's Avatar
Evolved Member
iTrader: (6)
 
Joined: Mar 2003
Posts: 1,020
Likes: 0
From: Deeetroit
Re: Re: SAFC install

Originally posted by rdrkt

To my knowledge the only AWD dyno in Pa is at AWE tuning in Willow Grove. But they specialize in VW/Audi and they wouldn’t be much help. Next on the list is BM Tranny in NJ. I would personally recommend BM because they are a DSM shop and they are more than familiar with how to make power on the 4g63. Next is Turbo XS Nate really knows his stuff too.
I'm in Detroit. Not too far from PA and can tune whatever you like on the AWD dyno. We use a Motec wideband O2 for tuning.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jangempo
Evo X Engine Management / Tuning Forums
0
Oct 25, 2014 02:00 PM
initialdrew
Evo X General
9
Sep 22, 2010 04:31 PM




All times are GMT -7. The time now is 08:10 PM.