My 272s are starting to lope quite a bit....didn't for the first couple months I had em.

My car has never thrown any codes.

 

This is normal. It will usually come on once or twice and then never again.

 

Well....I'm gonna go over to the shop that did the work and have them inspect a few things. I'm not sure if I'm gonna have them up the idle or not. It idles at 850 or higher now. I might just have them erase the code and see if it'll come back. If it does, then I'll ship my ECU out to get it reflashed for the 272's....

 

Ive had it since the cams were put in back during the summer. It will stay on for a few days then turn itself off, then come back on for a few days, etc...

 

If you think a "reflash for 272's" will fix your problem, you are going to be disappointed.

 

+1 never had a issue with mines at all....

 

When I installed my 272s I drove the car around for about 2 days before I sent my ECU out to be flashed by Dynoflash. After I got the ECU back in I threw this exact code. Sometimes it clears but when the car idles for along time it will thow the code again. I contacted Al and its not really a big deal at all. He was willing to reflash the ECU again to try to get it to clear but since it doesnt affect power at all I just left it. I wouldnt worry about it to much. If it bothers you that bad just talk to the person who tuned and see if you take your car to the dealer to get that new reflash at the dealer if they will put the same tune back on it after u get the car back.