stupid question on alky settings
stupid question on alky settings
I know on the controller there are two settings. One of them is when you want it to start spraying. The other "MAX" setting Im not really sure of. For example if I have it set at 18 max does it mean that its spraying 18 psi of alcohol into your intake?
Originally Posted by Derek888
I know on the controller there are two settings. One of them is when you want it to start spraying. The other "MAX" setting Im not really sure of. For example if I have it set at 18 max does it mean that its spraying 18 psi of alcohol into your intake?
no it means the pump is spraying at full speed/capacity at the max setting
Low setting is for the pump to start spraying and the max psi setting if for when you want the pump to be pumping its highest volume. The pump is progressive so it starts spraying slowly and ramps up.
Originally Posted by 4ringturncoat
Low setting is for the pump to start spraying and the max psi setting if for when you want the pump to be pumping its highest volume. The pump is progressive so it starts spraying slowly and ramps up.
i agree....my explanation could have been worded this way also
Originally Posted by 4ringturncoat
Low setting is for the pump to start spraying and the max psi setting if for when you want the pump to be pumping its highest volume. The pump is progressive so it starts spraying slowly and ramps up.
Originally Posted by Derek888
what were your settings on your alky kit?
I know your question wasnt directed at me but on my SMC V2 kit, I have it set to start spraying at 7 PSI of boost and maxes out at 26
Thread
Thread Starter
Forum
Replies
Last Post
EvoTech
General Engine Management / Tuning Forum
7
Jun 15, 2005 01:19 PM
