Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

stumbling idle

Thread Tools
 
Search this Thread
 
Old Feb 25, 2006 | 11:02 AM
  #1  
JSYEVO's Avatar
Thread Starter
Evolved Member
 
Joined: Mar 2005
Posts: 798
Likes: 1
From: El Paso, TX
stumbling idle

well my idle sounds like i have cams, but i dont. to describe it...it sounds normal but inside the car it seems to shake, and when you listen to the exhuast it hiccups, like when you have cams..what could be my problem?

my mods are dynoflash, greddy type s recirc (it did it when i had the factory dv on too), tbe, intake and mbc
Reply
Old Feb 25, 2006 | 11:05 AM
  #2  
bluebanana23's Avatar
Evolved Member
iTrader: (26)
 
Joined: May 2004
Posts: 2,032
Likes: 1
From: DTX
I have the exact same problem with the hipcupps but I posted a thread and noone replied 2 monthes ago. Must be us Texans. Hope someone will reply this time for the both of us.
Reply
Old Feb 25, 2006 | 11:12 AM
  #3  
evo959's Avatar
Newbie
 
Joined: May 2004
Posts: 29
Likes: 0
I would probaby reset the ECU first and drive around a while to see if it "fixes" anything.

Check spark plugs. might need new ones.

Could also be fuel system. injectors, pump etc.
Reply
Old Feb 25, 2006 | 11:16 AM
  #4  
bernardo's Avatar
Evolving Member
iTrader: (5)
 
Joined: Dec 2005
Posts: 268
Likes: 0
From: Connecticut
Same here. Brand new IX, 1000 miles. The idle is quite lumpy and there's some good vibration from inside the cabin. It got more noticable when I put on my TBE. I have read that a good flash usually smooths out the idle.

I'm meeting Al for a tune on Wed. I'll post back let you know if it improves.
Reply
Old Feb 25, 2006 | 11:55 AM
  #5  
JSYEVO's Avatar
Thread Starter
Evolved Member
 
Joined: Mar 2005
Posts: 798
Likes: 1
From: El Paso, TX
how would i diagnose the problem, ive reset the ecu and its the same.
Reply
Old Feb 25, 2006 | 12:08 PM
  #6  
bluebanana23's Avatar
Evolved Member
iTrader: (26)
 
Joined: May 2004
Posts: 2,032
Likes: 1
From: DTX
i think it's the plugs since resetting the ecu does nothing for me
Reply
Old Feb 25, 2006 | 12:10 PM
  #7  
JSYEVO's Avatar
Thread Starter
Evolved Member
 
Joined: Mar 2005
Posts: 798
Likes: 1
From: El Paso, TX
i got new plugs, coppers and gapped at .24
Reply
Old Feb 25, 2006 | 03:59 PM
  #8  
bluebanana23's Avatar
Evolved Member
iTrader: (26)
 
Joined: May 2004
Posts: 2,032
Likes: 1
From: DTX
evening bump
Reply
Old Feb 25, 2006 | 04:27 PM
  #9  
sophic's Avatar
Evolving Member
iTrader: (3)
 
Joined: May 2004
Posts: 244
Likes: 0
From: Austin
I have the same problem, had it for a long time.
Reply
Old Feb 25, 2006 | 04:31 PM
  #10  
housedj's Avatar
Evolved Member
iTrader: (2)
 
Joined: Jul 2004
Posts: 2,356
Likes: 0
From: in front of your car
Thumbs up

Originally Posted by JSYEVO
i got new plugs, coppers and gapped at .24
u need to get some NGK iridiums. they are pregapped to .028". the factory plugs are iridium as well. also check all your I/C & vacuum connections. u may have a LEAK...
Reply
Old Feb 25, 2006 | 04:31 PM
  #11  
Silvercar's Avatar
Evolving Member
iTrader: (10)
 
Joined: Sep 2003
Posts: 224
Likes: 0
From: Littleton, Co
when i dont drive my evo for a week or so then get in it and drive it and be hard on it it has a small lump in it i have a 05 evo and on my 03 evo it does the same thing i think its fairly comin car runs fine tho.
Reply
Old Feb 25, 2006 | 04:52 PM
  #12  
Murdock's Avatar
Newbie
iTrader: (1)
 
Joined: Aug 2004
Posts: 15
Likes: 0
From: Orlando
bump My car experiences the same problem and I would really like to know how to fix it.
Reply
Old Feb 25, 2006 | 11:54 PM
  #13  
JSYEVO's Avatar
Thread Starter
Evolved Member
 
Joined: Mar 2005
Posts: 798
Likes: 1
From: El Paso, TX
car pulls hard, dont think i have a boost leak, all vacuum lines are fine and pretty sure a couple of these guys having the same problem are still running the factory plugs
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
pilchenstein
Evo Engine / Turbo / Drivetrain
31
Jul 31, 2022 03:33 PM
gpintoevo9
Evo X General
23
Feb 3, 2020 08:02 AM
Kraise
Evo Engine / Turbo / Drivetrain
28
Dec 8, 2012 08:48 AM
waylonmunoz2005
Evo Engine / Turbo / Drivetrain
5
Dec 13, 2011 05:46 AM
Standing Z
Evo Engine / Turbo / Drivetrain
3
Oct 19, 2009 08:54 PM




All times are GMT -7. The time now is 10:36 AM.