2.3 Evo IX mr
Thread Starter
Evolving Member
iTrader: (10)
Joined: Jun 2006
Posts: 317
Likes: 0
From: Tempe Arizona
2.3 Evo IX mr
Does any one know if an evo 8 block works on a IX??
I have an evo 8 and 9 and am planning on selling the 8. It is not running right so if the block swap from 8 to 9 works than i would build the 8 block and put it in the 9 and the new 9 block in the 8. Killing two evos with one block i quess.
Is there any other builds that would be better than a 2.3 using the stock block.
I have an evo 8 and 9 and am planning on selling the 8. It is not running right so if the block swap from 8 to 9 works than i would build the 8 block and put it in the 9 and the new 9 block in the 8. Killing two evos with one block i quess.
Is there any other builds that would be better than a 2.3 using the stock block.
Last edited by AZ EVO IX MR; Sep 12, 2006 at 05:39 PM.
Originally Posted by AZ EVO IX MR
Does any one know if an evo 8 block works on a IX??
I have an evo 8 and 9 and am planning on selling the 8. It is not running right so if the block swap from 8 to 9 works than i would build the 8 block and put it in the 9 and the new 9 block in the 8. Killing two evos with one block i quess.
Is there any other builds that would be better than a 2.3 using the stock block.
I have an evo 8 and 9 and am planning on selling the 8. It is not running right so if the block swap from 8 to 9 works than i would build the 8 block and put it in the 9 and the new 9 block in the 8. Killing two evos with one block i quess.
Is there any other builds that would be better than a 2.3 using the stock block.
The Blocks are the same between an VIII and IX. The only difference is the head...
Evolving Member
Joined: Jul 2006
Posts: 136
Likes: 1
From: Mankato, MN
Originally Posted by AZ EVO IX MR
is there a better option to the 2.3
2.4L Long Rod, No replacement for displacement. It can rev higher than a 2.3L and has more displacement. But you'll need a new block
Evolving Member
Joined: Jul 2006
Posts: 136
Likes: 1
From: Mankato, MN
Originally Posted by Ang Wen Yan
It is called as 4G64 Destorke(AMS use this on thier drag EVO)
,not 2.2L.A 2.2L is fancy JDM Storker kit.
,not 2.2L.A 2.2L is fancy JDM Storker kit.Its a 2.4L block (4G64, or G4CS) with a 2.0L crank. Lots of the big DSM guys are running it and revving to 10K.
It gives you 2.1L of displacement.
Trending Topics
Evolved Member
Joined: Jun 2004
Posts: 2,552
Likes: 1
From: KL,Malaysia
Originally Posted by 9GUY9
Its a 2.4L block (4G64, or G4CS) with a 2.0L crank. Lots of the big DSM guys are running it and revving to 10K. It gives you 2.1L of displacement.
It gives you 2.1L of displacement.
Thread
Thread Starter
Forum
Replies
Last Post
SBR INC
Vendor Announcements
85
Nov 26, 2016 07:39 AM
Blue Evo 8
Evo Engine / Turbo / Drivetrain
2
Jun 19, 2006 10:30 PM
