Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Will a DSM manifold fit my evo?

Thread Tools
 
Search this Thread
 
Old Dec 5, 2006 | 03:14 PM
  #16  
KOEvo's Avatar
Evolved Member
iTrader: (5)
 
Joined: Aug 2005
Posts: 1,878
Likes: 0
From: Florida
The DNP is as good as it gets, i have looked...
Reply
Old Dec 5, 2006 | 03:59 PM
  #17  
DWAIST's Avatar
Evolving Member
iTrader: (5)
 
Joined: Aug 2006
Posts: 230
Likes: 1
From: ODESSA,TX
Originally Posted by KOEvo
The DNP is as good as it gets, i have looked...
dn performance definatly makes good stuff. that is what i run on my 2g talon with fp's 3575.

but "word on the street" is dn's stuff for the evo's doesn't alow enough room for a proper down pipe. i have emailed them about this rumor but i have yet to hear back from them. i'm really interested in thier t4 manifold but before i buy i need some questions answered!
Reply
Old Dec 5, 2006 | 08:29 PM
  #18  
neweraevo8's Avatar
Newbie
 
Joined: Sep 2006
Posts: 83
Likes: 0
From: Reno, NV
I tried putting my 05 evo exhaust manifold on my 90 Dsm and it looks the same but is complete apposite in inlets and outlets. With the simple fact that the turbo is facing different directions you can see that.
Reply
Old Aug 10, 2007 | 05:20 PM
  #19  
Evology's Avatar
Newbie
 
Joined: Aug 2005
Posts: 74
Likes: 0
say ur going with a custom T3 turbo setup.. will the manifold bolt right up to the head?? i mean.. i know the offset of the turbo will change.. but, a t3 flange is a t3 flange.. wont make a difference wouldnt it?
Reply
Old Aug 12, 2007 | 07:17 AM
  #20  
Evology's Avatar
Newbie
 
Joined: Aug 2005
Posts: 74
Likes: 0
bump
Reply
Old Aug 12, 2007 | 08:57 AM
  #21  
SUPERMAC's Avatar
Newbie
iTrader: (1)
 
Joined: Aug 2003
Posts: 11
Likes: 0
From: Vancouver, Washington
I have a manifold from an 95 GSt and it doesnt fit my evo. the holes are close but they are off. and the ports dont line up exactly. you have the ability you could possiblydremel and redrill some area to make it line up. but you still have the issue of the turbo being on the wrong side of the engine. evo setup is on the right. dsm is on the left. not a big deal i suppose, but non the less an issue.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
abazaba410
Evo Engine / Turbo / Drivetrain
6
Oct 28, 2013 03:39 PM
analogEvo
Evo Engine / Turbo / Drivetrain
2
May 15, 2011 04:20 PM
EmeryatSTM
Vendor Announcements
18
Nov 29, 2010 01:37 PM
keeler
EvoM New Member / FAQs / EvoM Rules
7
Aug 10, 2010 03:40 PM
Evo_Jay
ECU Flash
14
Feb 18, 2008 06:15 AM




All times are GMT -7. The time now is 07:45 PM.