HorsepowerFreaks 35R makes 568whp 442wtq on stock internals, intake manifold and TB!
Dec 7, 2006, 02:18 PM
#1
Evolving Member
Thread Starter
iTrader: (8)
Join Date: Dec 2005
Location: Portland, OR
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
HorsepowerFreaks 35R makes 568whp 442wtq on stock internals, intake manifold and TB!
UPDATE! After a lengthy development on our twin in-tank Walbro fuel system and 1000cc injectors my Evo made a pretty astounding number at 32psi - 568whp and 442wtq! (dyno sheet below) This was on our T4 GT35R turbo kit, twin Walbro fuel system, Behemoth IC kit w/ piping, and 3.5" Goliath exhaust system on STOCK internals and with a STOCK intake manifold and STOCK throttle body 
It is completely ridiculous to drive on the street; I'm all smiles 
What a rush! I'm very anxious to add valve springs, retainers, oversized valves and some porting to really maximize the powerband by revving past 7800RPM 
There's plenty more in this setup and I'm very pumped about the progress thus far! We're still pretty conservative at 11:1 AFRs and 12 degrees of timing at redline on C16 and have avoided knock completely to keep the motor in good health.
My Evo is headed back under the knife next week to revise our intercooler to maximize the core size and begin development of our intake manifold. I intend to push the limit even further when those items are complete
Even detuned at 20 psi on 92 octane and NO methanol I'm still making 411whp. Nice to be able to do that even on crap gas
For complete details on the kit for those that don't already know, see here:
HorsepowerFreaks T4 GT35R Turbo Kit
We've also developed our T4 turbo kit with a 67mm turbo for those seeking in excess of 750whp!
HorsepowerFreaks 67mm T4 Turbo Kit
Tom
It is completely ridiculous to drive on the street; I'm all smiles What a rush! I'm very anxious to add valve springs, retainers, oversized valves and some porting to really maximize the powerband by revving past 7800RPM There's plenty more in this setup and I'm very pumped about the progress thus far! We're still pretty conservative at 11:1 AFRs and 12 degrees of timing at redline on C16 and have avoided knock completely to keep the motor in good health.My Evo is headed back under the knife next week to revise our intercooler to maximize the core size and begin development of our intake manifold. I intend to push the limit even further when those items are complete
Even detuned at 20 psi on 92 octane and NO methanol I'm still making 411whp. Nice to be able to do that even on crap gas
For complete details on the kit for those that don't already know, see here:
HorsepowerFreaks T4 GT35R Turbo Kit
We've also developed our T4 turbo kit with a 67mm turbo for those seeking in excess of 750whp!
HorsepowerFreaks 67mm T4 Turbo Kit
Tom
Last edited by HPF Tom; Dec 13, 2006 at 04:21 PM.
