so i was going to install a fuel pump, but I went and check underneath my seat, and It is making alot of noise, buzzing sounds, dont know how to describe it. but the question is, is this a walbro 255 already, or does the stock fuel pump not make noise.

 

I never heard the stocker make a noise, but the Walbro definetly is loud with the back seat removed. I never took the seat out with the stocker in, as a matter of fact, so I don't know.

 

Did you buy the car used? If not then its not a walbro

 

yeah fo sho, it is used, when I got it, it was using boost tube, to connect to the wastegate, and turbo nipple, to the boost solinoid.

 

bump, any body else got any info.

 

one more bump

 

I'm going to guess it's a walbro... what did it should like while the car was not taken apart inside could you hear it at all?

I can hear mine most of the time

 

hmm not sure, i always had the radio on..

 

The most obvious solution is to pull it out and have a look. It will say walbro on it.

 

 

yeah I know but I am having problems taking it out, I couldnt get the lines off the barbs.

 

Read this.

http://www.evomoto.com/tech_info.php...3_13&tech_id=9

 

Yeah I read that, still didnt help me, get the barbs off, I squeeze 2 things together and it wouldnt pull off.

 

OK guys, listen......if you have nothing constructive to add, DON'T POST. I've cleaned this up, let's keep it on-topic.
J.D.

 

Thanks for the link Ak47po... im about to install one within the week and it was a great writeup. and he was right about the clamp... its impossible by hands sometimes, a set needle-nose pliers will do the trick neatly. (worked for the vacuum lines to my DV)