Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Difference in Nisei FMIC Street & Competition?

Thread Tools
 
Search this Thread
 
Old Jan 23, 2007 | 09:33 PM
  #1  
cloudy's Avatar
Thread Starter
Evolved Member
iTrader: (5)
 
Joined: May 2005
Posts: 655
Likes: 0
From: Arizona
Difference in Nisei FMIC Street & Competition?

Searched, but couldnt find any answers for my exact question.
Would I even see a difference if I got the Competition over the Street Nisei FMIC?
I plan to run it with my car that will have a FP3065 kit, and pushn about 500 on race gas.
Is it even worth it to dish out the extra $$ for a competition?
I know the competition is .5" thicker in IC width and outlet/inlet piping, but would that really be a difference in power gain with my hp #s?
Reply
Old Jan 24, 2007 | 04:44 AM
  #2  
deadbeatrec's Avatar
Evolved Member
iTrader: (9)
 
Joined: Jan 2005
Posts: 3,139
Likes: 0
From: Albany, NY
the street will be more than adequate to accommodate your setup
Reply
Old Jan 24, 2007 | 05:20 AM
  #3  
DWAIST's Avatar
Evolving Member
iTrader: (5)
 
Joined: Aug 2006
Posts: 230
Likes: 1
From: ODESSA,TX
the nisei "street" is a damn big intercooler as is. it will support 500hp and more! the street core alone is 25x12.62x3.5

off topic, i heard that nisei isn't building products anymore. i have been calling them all week long and i get no answer. i just get a voice mail recording. can anybody vouch for this?
Reply
Old Jan 24, 2007 | 05:54 AM
  #4  
locam's Avatar
Evolving Member
iTrader: (3)
 
Joined: Sep 2004
Posts: 308
Likes: 0
From: Randallstown, Maryland
ohh man that sucks, I hope they don’t stop, their IC's are amazing.

caelin~
Reply
Old Jan 24, 2007 | 07:26 AM
  #5  
Spooldyou's Avatar
Evolved Member
15 Year Member
iTrader: (52)
 
Joined: Sep 2005
Posts: 1,522
Likes: 0
From: Boston,MA
I got the street and its pretty large. i was going to go with the br RACe
Reply
Old Jan 24, 2007 | 09:05 AM
  #6  
EVOSlayer's Avatar
Evolving Member
 
Joined: Feb 2005
Posts: 138
Likes: 0
Did you try calling myevostore/motiongarage or were you calling Nisei direct? They have been out of stock for a while now but I don't believe they have stopped production.

And from what I've read (I can try to find the thread) the Competition core has less pressure drop across the core while still maintaining the cooling efficiency the street core had.
Reply
Old Jan 24, 2007 | 11:37 AM
  #7  
myevostore.com's Avatar
Newbie
iTrader: (17)
 
Joined: Oct 2004
Posts: 66
Likes: 0
From: Lake Forest, CA
Hey guys,

The Nisei Competition IC should be back in stock really soon. I've been working closely with them on developing new products including the Nisei Turbo System/Kit. All the other products are in stock including the pipe kits, 1018 lowers, and battery kits.

I respond faster to emails than voicemails because i'm always on the road and/or on the phone. You guys can email me directly at rob@motiongarage.com.

Originally Posted by EVOSlayer
And from what I've read (I can try to find the thread) the Competition core has less pressure drop across the core while still maintaining the cooling efficiency the street core had.
That is true. Actually the competition core cooled better and had almost 1 psi less pressure drop than the street when we tested it with Nisei. We were really excited about the results. The thing is a beast!!


Rob
Reply
Old Jan 24, 2007 | 11:48 AM
  #8  
deadbeatrec's Avatar
Evolved Member
iTrader: (9)
 
Joined: Jan 2005
Posts: 3,139
Likes: 0
From: Albany, NY
seems to me that Nisei really is doing there research to develope the best they possible can. cant wait to see the new products.
Reply
Old Jan 24, 2007 | 11:53 AM
  #9  
myevostore.com's Avatar
Newbie
iTrader: (17)
 
Joined: Oct 2004
Posts: 66
Likes: 0
From: Lake Forest, CA
Yes, unfortunately the negative bi-product is time. It takes a while for these products to come out cause of the R&D but I can assure you the goal is to be the best with every product. 2007 should be a pretty exciting year for Nisei fans and Evo owners.
Reply
Old Jan 24, 2007 | 11:54 AM
  #10  
speedomodel's Avatar
Evolved Member
iTrader: (15)
 
Joined: Dec 2003
Posts: 1,157
Likes: 0
From: Big Zero, NE
Any teaser specs on this upcoming Nisei Turbo System/Kit?
Reply
Old Jan 24, 2007 | 12:25 PM
  #11  
bboypuertoroc's Avatar
Evolved Member
Veteran: Army
iTrader: (17)
 
Joined: May 2005
Posts: 2,046
Likes: 76
From: Riverview, FL
Didn't the Comp core replace the Street core?
Reply
Old Jan 24, 2007 | 12:30 PM
  #12  
myevostore.com's Avatar
Newbie
iTrader: (17)
 
Joined: Oct 2004
Posts: 66
Likes: 0
From: Lake Forest, CA
Originally Posted by speedomodel
Any teaser specs on this upcoming Nisei Turbo System/Kit?
I would get crucified if I said anything. All I can say is that it's not a turbo kit made with off-the-shelf components. I got an OK from Nisei to post up this photo as a teaser. As you can see the manifold is cast.....ok that's all i can say!
Attached Thumbnails Difference in Nisei FMIC Street & Competition?-nisei-prototype-turbo-kit_spy.jpg  

Last edited by myevostore.com; Jan 24, 2007 at 12:38 PM.
Reply
Old Jan 24, 2007 | 12:32 PM
  #13  
myevostore.com's Avatar
Newbie
iTrader: (17)
 
Joined: Oct 2004
Posts: 66
Likes: 0
From: Lake Forest, CA
Originally Posted by bboypuertoroc
Didn't the Comp core replace the Street core?
At the moment, yes. Nisei has stopped making it until further notice. There's a possibility the street will be re-released in the future and be compatible with the stock under panel, making it smaller than it was previously.
Reply
Old Jan 24, 2007 | 01:25 PM
  #14  
dxbevo9's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jan 2005
Posts: 2,723
Likes: 0
From: Dubai, U.A.E.
Originally Posted by myevostore.com
I would get crucified if I said anything. All I can say is that it's not a turbo kit made with off-the-shelf components. I got an OK from Nisei to post up this photo as a teaser. As you can see the manifold is cast.....ok that's all i can say!

rob ... what turbo is that....if you tell me i will buy you dinner/beer next time you come to dubai...
Reply
Old Jan 24, 2007 | 03:04 PM
  #15  
sparky's Avatar
Evolved Member
iTrader: (1)
 
Joined: Mar 2005
Posts: 7,905
Likes: 5
From: Mesoamerica/ SF Bay Area
Rob: Do you have a prototype of this new Nissei turbo kit on your car yet? If so, how is driveability?
Reply



All times are GMT -7. The time now is 03:33 AM.