Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

BOV to the atmosphere Solution

Thread Tools
 
Search this Thread
 
Old Feb 12, 2007 | 06:16 AM
  #1  
evoixpr's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Nov 2006
Posts: 103
Likes: 0
BOV to the atmosphere Solution

Could be possible use my Greddy BOV to the atmosphere with out having problem of stalling?

Any way?
Reply
Old Feb 12, 2007 | 06:20 AM
  #2  
deadbeatrec's Avatar
Evolved Member
iTrader: (9)
 
Joined: Jan 2005
Posts: 3,139
Likes: 0
From: Albany, NY
yea, there is an HKS unit u can buy, forgot whats its called. sorry
Reply
Old Feb 12, 2007 | 06:21 AM
  #3  
cfdfireman1's Avatar
Evolved Member
iTrader: (11)
 
Joined: Oct 2005
Posts: 4,165
Likes: 0
From: Chicago
Be nice now guys.
Reply
Old Feb 12, 2007 | 06:23 AM
  #4  
4WS Tuning's Avatar
Former Sponsor
iTrader: (73)
 
Joined: Dec 2005
Posts: 4,668
Likes: 1
From: Ft. Lauderdale, Fl
theres a recirc kit...

i just tested a bov on my car... it'll drive and feel normal. but it was .2 leaner across the board and when i shifted it wasn't smooth at all and got about a full point richer.

cheers!
Reply
Old Feb 12, 2007 | 06:27 AM
  #5  
glgz's Avatar
Evolving Member
 
Joined: Oct 2004
Posts: 429
Likes: 0
From: Ohio
HKS makes a unit called EIDS which will correct the stalling. Wow this is a hot topic recently. I use it with a Greddy Type S on my car and it does what it should.
Reply
Old Feb 12, 2007 | 06:32 AM
  #6  
deadbeatrec's Avatar
Evolved Member
iTrader: (9)
 
Joined: Jan 2005
Posts: 3,139
Likes: 0
From: Albany, NY
Originally Posted by glgz
HKS makes a unit called EIDS which will correct the stalling. Wow this is a hot topic recently. I use it with a Greddy Type S on my car and it does what it should.
thats whats its called.
Reply
Old Feb 12, 2007 | 12:07 PM
  #7  
WaxThis2005's Avatar
Evolving Member
 
Joined: May 2006
Posts: 261
Likes: 0
From: Grafton, WI
I will be using a tial BOV intill I get a standalone. Some people have problems some dont. Seems to me that there are alot of 05s that dont have stalling issues.
Reply
Old Feb 12, 2007 | 12:17 PM
  #8  
Warrtalon's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jun 2004
Posts: 20,790
Likes: 2
From: Long Island, NY
Originally Posted by evoixpr
Could be possible use my Greddy BOV to the atmosphere with out having problem of stalling?

Any way?
You may not have problems with stalling, but you will still have between-shift problems caused by the purging of metered air.

Also, it makes no sense to try and use that Greddy BOV on your IX when your stocker is better.
Reply
Old Feb 12, 2007 | 03:10 PM
  #9  
evoixpr's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Nov 2006
Posts: 103
Likes: 0
Originally Posted by Warrtalon
You may not have problems with stalling, but you will still have between-shift problems caused by the purging of metered air.

Also, it makes no sense to try and use that Greddy BOV on your IX when your stocker is better.
Why the BOV of the IX would be better then the Greddy.
Reply
Old Feb 12, 2007 | 03:14 PM
  #10  
boostinjuice's Avatar
Evolved Member
iTrader: (5)
 
Joined: Apr 2006
Posts: 1,036
Likes: 0
From: Indiana
Originally Posted by evoixpr
Why the BOV of the IX would be better then the Greddy.
Because it is.. it hold 25psi without a problem..
Reply
Old Feb 12, 2007 | 03:54 PM
  #11  
BiFfMaN's Avatar
Evolving Member
iTrader: (3)
 
Joined: Jul 2006
Posts: 468
Likes: 5
From: Las Vegas
Speed density...not a personal fav

or

a blow though MAF setup

look it up..but it will be $$$

stay recirc till then....

From what i read you can get some "noise" out of the recirc if you remove the stock airbox and install a cone filter...but the stock airbox is good to about 400hp for most peoples setups.

Last edited by BiFfMaN; Feb 12, 2007 at 04:00 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DevilDog7
Evo X General
31
Mar 30, 2012 10:07 PM
cpunlamd
Evo X Engine / Turbo / Drivetrain
16
Feb 26, 2010 10:53 PM
Noogie
Evo Engine / Turbo / Drivetrain
6
Jan 8, 2009 10:59 PM
crazyndn49
Evo Engine / Turbo / Drivetrain
6
May 16, 2008 11:01 PM
Shaun@AWDMotorsports
Evo Engine / Turbo / Drivetrain
16
Nov 23, 2007 10:06 PM




All times are GMT -7. The time now is 09:18 PM.